package anycache

  1. Overview
  2. Docs

Anycache LRU/2Q cache

v0.7.4 — homepage

Consult the basics, examples, and module documentation.

References

Anycache

module type Monad = sig ... end
module type S = sig ... end
module Make (K : Map.OrderedType) (M : Monad) : S with type key = K.t and type 'a deferred = 'a M.t

define a cache with custom key and monad types

module Direct : Monad with type 'a t = ('a, exn) Result.result and type ('a, 'b) result = ('a, 'b) Result.result

a direct computation that can either succeed or fail

a cache with string keys and Result.result values

include S with type key = string and type 'a deferred = ('a, exn) Result.result
type key = string

the type for cache keys

type 'a deferred = ('a, exn) Result.result

the type for deferred computations

type 'a t

the type for caches storing associating keys of type key with values of type 'a

type 'a validator = (key * 'a option) -> 'a deferred

the type for cache validation callbacks. validate (key,old) is called with old = None if the key is not in the cache yet and has to be computed. It is called with old=Some data if the key is already in the cache. The validator has to decide whether to return the same value or recompute it (perhas because it is expired / no longer fresh).

val create : int -> 'a t

create n creates a LRU/2Q that can hold at most n elements

val with_cache : 'a t -> (key -> 'a deferred) -> key -> 'a deferred

with_cache cache f key acts like f key, except it might make fewer calls to f when the key is already in the cache. On successful termination of f key the result is stored in the cache. f key must always return the same value when called with the same key. Cached values never expire, they are only removed if the cache capacity is exceeded, see cache replacement policy.

val with_validator : 'a t -> 'a validator -> key -> 'a deferred

with_validator cache validator key calls validator each time key is accessed. If the key is not in the cache validator (key, None) is called and it should compute the value associated with key. If the key is already in the cache then validator [key, Some value] is called and validator should decide whether the value is still fresh, or if it should be recomputed. The value returned by validator in either case is stored in the cache. validate (key,_) is allowed to return different values when called with the same key again, provided it properly validates the lifetime of old entries. Values are removed from the cache when its capacity is exceeded, see cache replacement policy.

val get : 'a t -> key -> 'a option deferred

get cache key retrieves the key from the cache if it exists. The key's position in LRU is updated

val set : 'a t -> key -> 'a -> unit

set cache key value stores value under key in the cache. If a value for key was already stored then it is replaced by the new value. It is not specified whether the key's position is updated in the LRU.

module PendingLimit : sig ... end

Basics

This module defines a cache that can be used to speed up slow computations (typically involving network or disk I/O). When a computation finishes successfully its result is stored in the cache. If the computation fails only the key is cached, the value is recomputed assuming that errors are transitory.

If you try to lookup a value in the cache while a computation is in progress (only possible if you are using Lwt or Async) then you get the result from the previous computation if it succeeds (and recomputed on failure). This ensures that you don't flood the disk/network with queries for the same key. Handling timeouts is the caller's responsibility though.

If the computation is referentially transparent (always returns the same value when invoked with the same key) then Anycache.S.with_cache should be used for caching.

If the computation can return different values when called at different times, and this affects the semantics of your application (e.g. reading a file, performing an http query) then Anycache.S.with_validator should be used. It allows to specify a validator that can determine whether the result is still valid, and recompute it if needed (e.g. by performing a conditional HTTP GET).

The lookup times are worst case logarithmic in the size of the cache. This is needed to avoid the worst case linear lookup times of a hash table in case of collisions (the keys are assumed to be externally controllable, e.g. from a URL or form values). If this overhead is not acceptable or you just want to cache pure computations look at Memo (from core_kernel) or CCCache (from containers) instead.

A cache with string keys is provided by default, you can instantiate your own using Make.

Cache replacement policy

When the cache's capacity is exceeded an old element is removed. The old element is determined such that we keep often accessed values in the cache, and that accessing a long sequence of elements once (a scan) doesn't completely remove all elements from the cache.

Three queues are used: short-term (A1in), evicted short-term (A1out), and long-term (Amain).

Elements start out in the short-term cache, and when its capacity is exceeded the element is moved to the evicted short-term queue (we preserve the data). If it is accessed again while on the evicted queue it is promoted to the long-term queue, otherwise when the evicted queue's capacity is exceeded it is dropped. Accessing elements while on the short-term queue has no effect, and it is managed like a FIFO queue.

When the long-term queue's capacity is exceeded its Least Recently Used element is discarded.

The short-term queue stores at most 25% of total capacity, and the long-term queue stores at most 50%. The evicted queue's size is dynamically adjusted to use all available space, i.e. when the long-term queue has few elements it will store more than 25% of the elements. This is done so that we always use the cache to its full capacity, even if the long-term elements are few.

Examples

Given a potentially slow function (DNS lookup):

open Result
let lookup name =
  Printf.printf "Looking up %s\n" name;
  try Ok (Unix.getaddrinfo name "" [])
  with e -> Error e

let print_result = function
| Ok lst -> Printf.printf "Got %d addresses\n" (List.length lst);
| Error e -> raise e

We can construct a cached version:

let cache = Anycache.create 1024
let cached_lookup = Anycache.with_cache cache lookup

let () =
  print_result (cached_lookup "example.com");
  print_result (cached_lookup "example.com");
  print_result (cached_lookup "example.net");

Running it produces:

$ ocaml $(opam config var anycache:doc)/example.ml
Looking up example.com
Got 6 addresses
Got 6 addresses
Looking up example.net
Got 6 addresses
OCaml

Innovation. Community. Security.