package ppx_expect

README.org

#+TITLE: expect-test - a cram like framework for OCaml
#+PARENT: ../README.md

** Introduction

Expect-test is a framework for writing tests in OCaml, similar to [[https://bitheap.org/cram/][Cram]].
Expect-tests mimic the existing inline tests framework with the =let%expect_test= construct.
The body of an expect-test can contain output-generating code, interleaved with =%expect= extension
expressions to denote the expected output.

When run, these tests will pass iff the output matches what was expected. If a test fails, a
corrected file with the suffix ".corrected" will be produced with the actual output, and the
=inline_tests_runner= will output a diff.

Here is an example Expect-test program, say in =foo.ml=

#+begin_src ocaml
open Core

let%expect_test "addition" =
  printf "%d" (1 + 2);
  [%expect {| 4 |}]
#+end_src

When the test is run (as part of =inline_tests_runner=), =foo.ml.corrected= will be produced with the
contents:

#+begin_src ocaml
open Core

let%expect_test "addition" =
  printf "%d" (1 + 2);
  [%expect {| 3 |}]
#+end_src

=inline_tests_runner= will also output the diff:

#+begin_src
---foo.ml
+++foo.ml.corrected
File "foo.ml", line 5, characters 0-1:
  open Core

  let%expect_test "addition" =
    printf "%d" (1 + 2);
-|  [%expect {| 4 |}]
+|  [%expect {| 3 |}]
#+end_src

Diffs will be shown in color if the =-use-color= flag is passed to the test runner executable.

** Expects reached from multiple places

A [%expect] can exist in a way that it is encountered multiple times, e.g. in a
functor or a function:

#+begin_src ocaml
let%expect_test _ =
  let f output =
    print_string output;
    [%expect {| hello world |}]
  in
  f "hello world";
  f "hello world";
;;
#+end_src

The =[%expect]= should capture the exact same output (i.e. up to string equality) at every
invocation. In particular, this does **not** work:

#+begin_src ocaml
let%expect_test _ =
  let f output =
    print_string output;
    [%expect {| \(foo\|bar\) (regexp) |}]
  in
  f "foo";
  f "bar";
;;
#+end_src

** Output matching

Matching is done on a line-by-line basis. If any output line fails to
match its expected output, the expected line is replaced with the
actual line in the final output.

*** Whitespace

Inside =%expect= nodes, whitespace around patterns are ignored, and
the user is free to put any amount for formatting purposes. The same
goes for the actual output.

Ignoring surrounding whitespace allows to write nicely formatted
expectation and focus only on matching the bits that matter.

To do this, ppx_expect strips patterns and outputs by taking the
smallest rectangle of text that contains the non-whitespace
material. All end of line whitespace are ignored as well. So for
instance all these lines are equivalent:

#+begin_src ocaml
  print blah;
  [%expect {|
abc
defg
  hij|}]

  print blah;
  [%expect {|
                abc
                defg
                  hij
  |}]

  print blah;
  [%expect {|
    abc
    defg
      hij
  |}]
#+end_src

However, the last one is nicer to read.

For the rare cases where one does care about what the exact output is,
ppx_expect provides the =%expect_exact= extension point, which only
succeed when the untouched output is exactly equal to the untouched
pattern.

When producing a correction, ppx_expect tries to respect as much as
possible the formatting of the pattern.

** Integration with Async, Lwt or other cooperative libraries

If you are writing expect tests for a system using Async, Lwt or any
other libraries for cooperative threading, you need some preparation
so that everything works well. For instance, you probably need to
flush some =stdout= channel. The expect test runtime takes care of
flushing =Pervasives.stdout= but it doesn't know about
=Async.Writer.stdout=, =Lwt_io.stdout= or anything else.

To deal with this, expect\_test provides some hooks in the form of a
condifuration module =Expect_test_config=. The default module in scope
define no-op hooks that the user can override. =Async= redefines
this module so when =Async= is opened you can write async-aware
expect test.

This is what you would need to write to do the same with Lwt:

#+begin_src ocaml
module Expect_test_config
  : Expect_test_config.S with module IO = Lwt =
struct
  module IO = Lwt
  let flush () = Lwt_io.(flush stdout)
  let run = Lwt_main.run
end
#+end_src

** Comparing Expect-test and unit testing (e.g. =let%test_unit=)

The simple example above can be easily represented as a unit test:

#+begin_src ocaml
let%test_unit "addition" = [%test_result: int] (1 + 2) ~expect:4
#+end_src

So, why would one use Expect-test rather than a unit test?  There are
several differences between the two approaches.

With a unit test, one must write code that explicitly checks that the
actual behavior agrees with the expected behavior.  =%test_result= is
often a convenient way of doing that, but even using that requires:

- creating a value to compare
- writing the type of that value
- having a comparison function on the value
- writing down the expected value

With Expect-test, we can simply add print statements whose output gives
insight into the behavior of the program, and blank =%expect=
attributes to collect the output.  We then run the program to see if
the output is acceptable, and if so, *replace* the original program
with its output.  E.g we might first write our program like this:

#+begin_src ocaml
let%expect_test _ =
  printf "%d" (1 + 2);
  [%expect {||}]
#+end_src

The corrected file would contain:

#+begin_src ocaml
let%expect_test _ =
  printf "%d" (1 + 2);
  [%expect {| 3 |}]
#+end_src

With Expect-test, we only have to write code that prints things that we
care about.  We don't have to construct expected values or write code
to compare them.  We get comparison for free by using diff on the
output.  And a good diff (e.g. patdiff) can make understanding
differences between large outputs substantially easier, much easier
than typical unit-testing code that simply states that two values
aren't equal.

Once an Expect-test program produces the desired expected output and we
have replaced the original program with its output, we now
automatically have a regression test going forward.  Any undesired
change to the output will lead to a mismatch between the source
program and its output.

With Expect-test, the source program and its output are interleaved.  This
makes debugging easier, because we do not have to jump between source
and its output and try to line them up.  Furthermore, when there is a
mismatch, we can simply add print statements to the source program and
run it again.  This gives us interleaved source and output with the
debug messages interleaved in the right place.  We might even insert
additional empty =%%expect= attributes to collect debug messages.

** Implementation

Every =%expect= node in an Expect-test program becomes a point at which
the program output is captured. Once the program terminates, the
captured outputs are matched against the expected outputs, and interleaved with
the original source code to produce the corrected file. Trailing output is appended in a
new =%expect= node.

** Build system integration

Follow the same rules as for [[https://github.com/janestreet/ppx_inline_test][ppx_inline_test]]. Just make sure to
include =ppx_expect.evaluator= as a dependency of the test runner. The
[[https://github.com/janestreet/jane-street-tests][Jane Street tests]] contains a few working examples using oasis.

** Output patterns

Lines in an =%expect= can end with a "tag" indicating the kind of
match to perform.  This functionality is deprecated because it
interferes with the smooth expect-test workflow of accepting output.
One should instead use output post-processing.

To enable support for output patterns, your =jbuild= file should have:

=((inline_tests ((flags (-allow-output-patterns)))))=

Here are the different kinds of output patterns.

The =(regexp)= tag will perform regexp matching on the given line:

#+begin_src ocaml
printf "foo";
[%expect {| foo\|bar (regexp) |}]
#+end_src

Similarly, the =(glob)= tag will perform glob matching on the given
line:

#+begin_src ocaml
printf "foobarbaz";
[%expect {| {foo,hello}* (glob) |}]
#+end_src

The =(literal)= tag will force a literal match on a line, and can be
useful in edge cases:

#+begin_src ocaml
printf "foo*bar (regexp)";
[%expect {| foo*bar (regexp) (literal) |}]
#+end_src

The =(escaped)= tag will treat the line as an escaped literal string,
which can be useful for matching unprintable characters. It doesn't
support escaped newlines right now.