package dune-configurator

2.5.1 (17/04/2020)

• [coq] Fix install .v files for Coq theories (#3384, @lthms)

• [coq] Fix install path for theory names with level greater than 1 (#3358, @ejgallego)

• Fix a bug introduced in 2.0.0 where the [locks] field in rules with no targets had no effect. (@aalekseyev, report by @craigfe)

2.5.0 (09/04/2020)

• Add a --release option meaning the same as -p but without the package filtering. This is useful for custom dune invocation in opam files where we don't want -p (#3260, @diml)

• Fix a bug introduced in 2.4.0 causing .bc programs to be built with -custom by default (#3269, fixes #3262, @diml)

• Allow contexts to be defined with local switches in workspace files (#3265, fix #3264, @rgrinberg)

• Delay expansion errors until the rule is used to build something (#3261, fix #3252, @rgrinberg, @diml)

• [coq] Support for theory dependencies and compositional builds using new field (theories ...) (#2053, @ejgallego, @rgrinberg)

• From now on, each version of a syntax extension must be explicitely tied to a minimum version of the dune language. Inconsistent versions in a dune-project will trigger a warning for version <=2.4 and an error for versions >2.4 of the dune language. (#3270, fixes #2957, @voodoos)

• [coq] Bump coq lang version to 0.2. New coq features presented this release require this version of the coq lang. (#3283, @ejgallego)

• Prevent installation of public executables disabled using the enabled_if field. Installation will now simply skip such executables instead of raising an error. (#3195, @voodoos)

• dune upgrade will now try to upgrade projects using versions <2.0 to version 2.0 of the dune language. (#3174, @voodoos)

• Add a top command to integrate dune with any toplevel, not just utop. It is meant to be used with the new #use_output directive of OCaml 4.11 (#2952, @mbernat, @diml)

• Allow per-package version in generated opam files (#3287, @toots)

• [coq] Introduce the coq.extraction stanza. It can be used to extract OCaml sources (#3299, fixes #2178, @rgrinberg)

• Load ppx rewriters in dune utop and add pps field to toplevel stanza. Ppx extensions will now be usable in the toplevel (#3266, fixes #346, @stephanieyou)

• Add a (subdir ..) stanza to allow evaluating stanzas in sub directories. (#3268, @rgrinberg)

• Fix a bug preventing one from running inline tests in multiple modes (#3352, @diml)

• Allow the use of the %{profile} variable in the enabled_if field of the library stanza. (#3344, @mrmr1993)

• Allow the use of %{ocaml_version} variable in enabled_if field of the library stanza. (#3339, @voodoos)

• Fix dune build freezing on MacOS when cache is enabled. (#3249, fixes ##2973, @artempyanykh)

2.4.0 (06/03/2020)

• Add mdx extension and stanza version 0.1 (#3094, @NathanReb)

• Allow to make Odoc warnings fatal. This is configured from the (env ...) stanza. (#3029, @Julow)

• Fix separate compilation of JS when findlib is not installed. (#3177, @nojb)

• Add a dune describe command to obtain the topology of a dune workspace, for projects such as ROTOR. (#3128, @diml)

• Add plugin linking mode for executables and the (embed_in_plugin_libraries ...) field. (#3141, @nojb)

• Add an %{ext_plugin} variable (#3141, @nojb)

• Dune will no longer build shared objects for stubs if supports_shared_libraries is false (#3225, fixes #3222, @rgrinberg)

• Fix a memory leak in the file-watching mode (dune build -w) (#3220, @snowleopard and @aalekseyev)

2.3.1 (20/02/2020)

• Fix versioning of artifact variables (eg %{cmxa:...}), which were introduced in 2.0, not 1.11. (#3149, @nojb)

• Fix a bug introduced in 2.3.0 where dune insists on using fswatch on linux (even when inotifywait is available). (#3162, @aalekseyev)

• Fix a bug causing all executables to be considered as optional (#3163, @diml)

2.3.0 (15/02/2020)

• Improve validation and error handling of arguments to dune init (#3103, fixes #3046, @shonfeder)

• dune init exec NAME now uses the NAME argument for private modules (#3103, fixes #3088, @shonfeder)

• Avoid linear walk to detect children, this should greatly improve performance when a target has a large number of dependencies (#2959, @ejgallego, @aalekseyev, @Armael)

• [coq] Add (boot) option to (coq.theories) to enable bootstrap of Coq's stdlib (#3096, @ejgallego)

• [coq] Deprecate public_name field in favour of package (#2087, @ejgallego)

• Better error reporting for "data only" and "vendored" dirs. Using these with anything else than a strict subdirectory or * will raise an error. The previous behavior was to just do nothing (#3056, fixes #3019, @voodoos)

• Fix bootstrap on bytecode only switches on windows or where -j1 is set. (#3112, @xclerc, @rgrinberg)

• Allow enabled_if fields in executable(s) stanzas (#3137, fixes #1690 @voodoos)

• Do not fail if ocamldep, ocamlmklib, or ocaml are absent. Wait for them to be used to fail (#3138, @rgrinberg)

• Introduce a strict_package_deps mode that verifies that dependencies between packages in the workspace are specified correctly. (@rgrinberg, #3117)

• Make sure the @all alias is defined when no dune file is present in a directory (#2946, fix #2927, @diml)

2.2.0 (06/02/2020)

• dune test is now a command alias for dune runtest. This is to make the CLI less idiosyncratic (#3006, @shonfeder)

• Allow to set menhir flags in the env stanza using the menhir_flags field. (#2960, fix #2924, @bschommer)

• By default, do not show the full command line of commands executed by dune when dune is executed inside dune. This is to make integration tests more reproducible (#3042, @diml)

• dune subst now works even without opam files (#2955, fixes #2910, @fangyi-zhou and @diml)

• Hint when trying to execute an executable defined in the current directory without using the ./ prefix (#3041, fixes #1094, @voodoos).

• Extend the list of modifiers that can be nested under with-accepted-exit-codes with chdir, setenv, ignore-<outputs>, with-stdin-from and with-<outputs>-to (#3027, fixes #3014, @voodoos)

• It is now an error to have a preprocessing dependency on a ppx rewriter library that is not marked as (kind ppx_rewriter) (#3039, @snowleopard).

• Fix permissions of files promoted to the source tree when using the shared cache. In particular, make them writable by the user (#3043, fixes #3026, @diml)

• Only detect internal OCaml tools with .opt extensions. Previously, this detection applied to other binaries as well (@kit-ty-kate, @rgrinberg, #3051).

• Give the user a proper error message when they try to promote into a source directory that doesn't exist. (#3073, fix #3069, @rgrinberg)

• Correctly build vendored packages in -p mode. These packages were incorrectly filtered out before. (#3075, @diml)

• Do not install vendored packages (#3074, @diml)

• make now prints a message explaining the main targets available (#3085, fix #3078, @diml)

• Add a byte_complete executable mode to build programs as self-contained bytecode programs (#3076, fixes #1519, @diml)

2.1.3 (16/01/2020)

• Fix building the OCaml compiler with Dune (#3038, fixes #2974, @diml)

2.1.2 (08/01/2020)

• Fix a bug in the Fiber.finalize function of the concurrency monad of Dune, causing a race condition at the user level (#3009, fix #2958, @diml)

2.1.1 (07/01/2020)

• Guess foreign archives & native archives for libraries defined using the META format. (#2994, @rgrinberg, @anmonteiro)

• Fix generation of .merlin files when depending on local libraries with more than one source directory. (#2983, @rgrinberg)

2.1.0 (21/12/2019)

• Attach cinaps stanza actions to both @runtest and @cinaps aliases (#2831, @NathanReb)

• Add variables %{lib-private...} and %{libexec-private...} for finding build paths of files in public and private libraries within the same project. (#2901, @snowleopard)

• Add --mandir option to $ dune install. This option allows to override the installation directory for man pages. (#2915, fixes #2670, @rgrinberg)

• Fix dune --version. The bootstrap didn't compute the version correctly. (#2929, fixes #2911, @diml)

• Do not open the log file in dune clean. (#2965, fixes #2964 and #2921, @diml)

• Support passing two arguments to =, <>, ... operators in package dependencies so that we can have things such as (<> :os win32) (#2965, @diml)

2.0.1 (17/12/2019)

• Delay errors raised by invalid dune-package files. The error is now raised only if the invalid package is treated as a library and used to build something. (#2972, @rgrinberg)

2.0.0 (20/11/2019)

• Remove existing destination files in install before installing the new ones. (#2885, fixes #2883, @bschommer)

• The action field in the alias stanza is not available starting lang dune 2.0. The alias field in the rule stanza is a replacement. (#2846, fixes 2681, @rgrinberg)

• Introduce alias and package fields to the rule stanza. This is the preferred way of attaching rules to aliases. (#2744, @rgrinberg)

• Add field (optional) for executable stanzas (#2463, fixes #2433, @bobot)

• Infer targets for rule stanzas expressed in long form (#2494, fixes #2469, @NathanReb)

• Indicate the progress of the initial file tree loading (#2459, fixes #2374, @bobot)

• Build .cm[ox] files for executables more eagerly. This speeds up builds at the cost of building unnecessary artifacts in some cases. Some of these extra artifacts can fail to built, so this is a breaking change. (#2268, @rgrinberg)

• Do not put the <package>.install files in the source tree unless -p or --promote-install-files is passed on the command line (#2329, @diml)

• Compilation units of user defined executables are now mangled by default. This is done to prevent the accidental collision with library dependencies of the executable. (#2364, fixes #2292, @rgrinberg)

• Enable (explicit_js_mode) by default. (#1941, @nojb)

• Add an option to clear the console in-between builds with --terminal-persistence=clear-on-rebuild

• Stop symlinking object files to main directory for stanzas defined jbuild files (#2440, @rgrinberg)

• Library names are now validated in a strict fashion. Previously, invalid names would be allowed for unwrapped libraries (#2442, @rgrinberg)

• mli only modules must now be explicitly declared. This was previously a warning and is now an error. (#2442, @rgrinberg)

• Modules filtered out from the module list via the Ordered Set Language must now be actual modules. (#2442, @rgrinberg)

• Actions which introduce targets where new targets are forbidden (e.g. preprocessing) are now an error instead of a warning. (#2442, @rgrinberg)

• No longer install a jbuilder binary. (#2441, @diml)

• Stub names are no longer allowed relative paths. This was previously a warning and is now an error (#2443, @rgrinberg).

• Define (paths ...) fields in (context ...) definitions in order to set or extend any PATH-like variable in the context environment. (#2426, @nojb)

• The diff action will always normalize newlines before diffing. Perviousy, it would not do this normalization for rules defined in jbuild files. (#2457, @rgrinberg)

• Modules may no longer belong to more than one stanza. This was previously allowed only in stanzas defined in jbuild files. (#2458, @rgrinberg)

• Remove support for jbuild-ignore files. They have been replaced by the the dirs stanza in dune files. (#2456, @rgrinberg)

• Add a new config option sandboxing_preference, the cli argument --sandbox, and the dep spec sandbox in dune language. These let the user control the level of sandboxing done by dune per rule and globally. The rule specification takes precedence. The global configuration merely specifies the default. (#2213, @aalekseyev, @diml)

• Remove support for old style subsystems. Dune will now emit a warning to reinstall the library with the old style subsystem. (#2480, @rgrinberg)

• Add action (with-stdin-from ) to redirect input from when performing . (#2487, @nojb)

• Change the automatically generated odoc index to only list public modules. This only affects unwrapped libraries (#2479, @rgrinberg)

• Set up formatting rules by default. They can be configured through a new (formatting) stanza in dune-project (#2347, fixes #2315, @emillon)

• Change default target from @install to @all. (#2449, fixes #1220, @rgrinberg)

• Include building stubs in @check rules. (@rgrinberg, #2530)

• Get rid of ad-hoc rules for guessing the version. Dune now only relies on the version written in the dune-project file and no longer read VERSION or similar files (#2541, @diml)

• In (diff? x y) action, require x to exist and register a dependency on that file. (#2486, @aalekseyev)

• On Windows, an .exe suffix is no longer added implicitly to binary names that already end in .exe. Second, when resolving binary names, .opt variants are no longer chosen automatically. (#2543, @nojb)

• Make (diff? x y) move the correction file (y) away from the build directory to promotion staging area. This makes corrections work with sandboxing and in general reduces build directory pollution. (#2486, @aalekseyev, fixes #2482)

• c_flags, c_names and cxx_names are now supported in executable and executables stanzas. (#2562, @nojb) Note: this feature has been subsequently extended into a separate foreign_stubs field. The fields c(xx)_names and c(xx)_flags are now deleted. (#2659, RFC #2650, @snowleopard)

• Remove git integration from $ dune upgrade (#2565, @rgrinberg)

• Add a --disable-promotion to disable all modification to the source directory. There's also a corresponding DUNE_DISABLE_PROMOTION environment variable. (#2588, fix #2568, @rgrinberg)

• Add a forbidden_libraries field to prevent some library from being linked in an executable. This help detecting who accidently pulls in unix for instance (#2570, @diml)

• Fix incorrect error message when a variable is expanded in static context: %{lib:lib:..} when the library does not exist. (#2597, fix #1541, @rgrinberg)

• Add --sections option to $ dune install to install subsections of .install files. This is useful for installing only the binaries in a workspace for example. (#2609, fixes #2554, @rgrinberg)

• Drop support for jbuild and jbuild-ignore files (#2607, @diml)

• Add a dune-action-plugin library for describing dependencies direcly in the executable source. Programs that use this feature can be run by a new action (dynamic-run ...). (#2635, @staronj, @aalekseyev)

• Stop installing the ocaml-syntax-shims binary. In order to use future_syntax, one now need to depend on the ocaml-syntax-shims package (#2654, @diml)

• Add support for dependencies that are re-exported. Such dependencies are marked withre_export and will automatically be provided to users of a library (#2605, @rgrinberg)

• Add a deprecated_library_name stanza to redirect old names after a library has been renamed (#2528, @diml)

• Error out when a preprocessor_deps field is present but not preprocess field is. It is a warning with Dune 1.x projects (#2660, @Julow)

• Dune will use -output-complete-exe instead of -custom when compiling self-contained bytecode executables whenever this options is available (OCaml version >= 4.10) (#2692, @nojb)

• Add action (with-accepted-exit-codes <pred> <action>) to specify the set of successful exit codes of <action>. <pred> is specified using the predicate language. (#2699, @nojb)

• Do not setup rules for disabled libraries (#2491, fixes #2272, @bobot)

• Configurator: filter out empty flags from pkg-config (#2716, @AltGr)

• no_keep_locs is a no-op for projects that use lang dune older than 2.0. In projects where the language is at least 2.0, the field is now forbidden. (#2752, fixes #2747, @rgrinberg)

• Extend support for foreign sources and archives via the (foreign_library ...) stanza as well as the (foreign_stubs ...) and (foreign_archives ...) fields. (#2659, RFC #2650, @snowleopard)

• Add (deprecated_package_names) field to (package) declaration in dune-project. The names declared here can be used in the (old_public_name) field of (deprecated_library_name) stanza. These names are interpreted as library names (not prefixed by a package name) and appropiate redirections are setup in their META files. This feaure is meant to migrate old libraries which do not follow Dune's convention of prefixing libraries with the package name. (#2696, @nojb)

• The fields license, authors, maintainers, source, bug_reports, homepage, and documentation of dune-project can now be overriden on a per-package basis. (#2774, @nojb)

• Change the default modes field of executables to (mode exe). If one wants to build a bytecode program, it now needs to be explicitly requested via (modes byte exe). (#2851, @diml)

• Allow ccomp_type as a variable for evaluating enabled_if. (#2855, @dra27, @rgrinberg)

• Stricter validation of file names in select. The file names of conditional sources must match the prefix and the extension of the resultant filename. (#2867, @rgrinberg)

• Add flag disable_dynamically_linked_foreign_archives to the workspace file. If the flag is set to true then: (i) when installing libraries, we do not install dynamic foreign archives dll*.so; (ii) when building executables in the byte mode, we statically link in foreign archives into the runtime system; (iii) we do not generate any dll*.so rules. (#2864, @snowleopard)

• Reimplement the bootstrap procedure. The new procedure is faster and should no longer stack overflow (#2854, @dra27, @diml)

• Allow .opam.template files to be generated using rules (#2866, @rgrinberg)

• Delete the deprecated self_build_stubs_archive field, replaced by foreign_archives.

1.11.4 (09/10/2019)

• Allow to mark directories as data_only_dirs without including them as dirs (#2619, fix #2584, @rgrinberg)

• Fix reading .install files generated with an external --build-dir. (#2638, fix #2629, @rgrinberg)

1.11.3 (23/08/2019)

• Fix a ppx hash collision in watch mode (#2546, fixes #2520, @diml)

1.11.2 (20/08/2019)

• Remove the optimisation of passing -nodynlink for executalbes when not necessary. It seems to be breaking things (see #2527, @diml)

• Fix invalid library names in dune-package files. Only public names should exist in such files. (#2558, fix #2425, @rgrinberg)

1.11.1 (09/08/2019)

• Fix config file dependencies of ocamlformat (#2471, fixes #2464, @nojb)

• Cleanup stale directories when using (source_tree ...) in the presence of directories with only sub-directories and no files (#2514, fixes #2499, @diml)

1.11.0 (23/07/2019)

• Don't select all local implementations in dune utop. Instead, let the default implementation selection do its job. (#2327, fixes #2323, @TheLortex, review by @rgrinberg)

• Check that selected implementations (either by variants or default implementations) are indeed implementations. (#2328, @TheLortex, review by @rgrinberg)

• Don't reserve the Ppx toplevel module name for ppx rewriters (#2242, @diml)

• Redesign of the library variant feature according to the #2134 proposal. The set of variants is now computed when the virtual library is installed. Introducing a new external_variant stanza. (#2169, fixes #2134, @TheLortex, review by @diml)

• Add proper line directives when copying .cc and .cxx sources (#2275, @rgrinberg)

• Fix error message for missing C++ sources. The .cc extension was always ignored before. (#2275, @rgrinberg)

• Add $ dune init project subcommand to create project boilerplate according to a common template. (#2185, fixes #159, @shonfeder)

• Allow to run inline tests in javascript with nodejs (#2266, @hhugo)

• Build ppx.exe as compiling host binary. (#2286, fixes #2252, @toots, review by @rgrinberg and @diml)

• Add a cinaps extension and stanza for better integration with the cinaps tool tool (#2269, @diml)

• Allow to embed build info in executables such as version and list and version of statically linked libraries (#2224, @diml)

• Set version in META and dune-package files to the one read from the vcs when no other version is available (#2224, @diml)

• Add a variable %{target} to be used in situations where the context requires at most one word, so %{targets} can be confusing; stdout redirections and "-o" arguments of various tools are the main use case; also, introduce a separate field target that must be used instead of targets in those situations. (#2341, @aalekseyev)

• Fix dependency graph of wrapped_compat modules. Previously, the dependency on the user written entry module was omitted. (#2305, @rgrinberg)

• Allow to promote executables built with an executable stanza (#2379, @diml)

• When instantiating an implementation with a variant, make sure it matches virtual library's list of known implementations. (#2361, fixes #2322, @TheLortex, review by @rgrinberg)

• Add a variable %{ignoring_promoted_rules} that is true when --ingore-promoted-rules is passed on the command line and false otherwise (#2382, @diml)

• Fix a bug in future_syntax where the characters @ and & were not distinguished in the names of binding operators (let@ was the same as let&) (#2376, @aalekseyev, @diml)

• Workspaces with non unique project names are now supported. (#2377, fix #2325, @rgrinberg)

• Improve opam generation to include the dune dependencies with the minimum constraint set based on the dune language version specified in the dune-project file. (2383, @avsm)

• The order of fields in the generated opam file now follows order preferred in opam-lib. (@avsm, #2380)

• Fix coloring of error messages from the compiler (@diml, #2384)

• Add warning 66 to default set of warnings starting for dune projects with language verison >= 1.11 (@rgrinberg, @diml, fixes #2299)

• Add (dialect ...) stanza (@nojb, #2404)

• Add a --context argument to dune install/uninstall (@diml, #2412)

• Do not warn about merlin files pre 1.9. This warning can only be disabled in 1.9 (#2421, fixes #2399, @emillon)

• Add a new inline_tests field in the env stanza to control inline_tests framework with a variable (#2313, @mlasson, original idea by @diml, review by @rgrinberg).

• New binary kind js for executables in order to explicitly enable Javascript targets, and a switch (explicit_js_mode) to require this mode in order to declare JS targets corresponding to executables. (#1941, @nojb)

1.10.0 (04/06/2019)

• Restricted the set of variables available for expansion in the destination filename of install stanza to simplify implementation and avoid dependency cycles. (#2073, @aalekseyev, @diml)

• [menhir] call menhir from context root build_dir (#2067, @ejgallego, review by @diml, @rgrinberg)

• [coq] Add coq.pp stanza to help with pre-processing of grammar files (#2054, @ejgallego, review by @rgrinberg)

• Add a new more generic form for the promote mode: (promote (until-clean) (into <dir>)) (#2068, @diml)

• Allow to promote only a subset of the targets via (promote (only <pred>)). For instance: (promote (only *.mli)) (#2068, @diml)

• Improve the behavior when a strict subset of the targets of a rule is already in the source tree for projects using the dune language < 1.10 (#2068, fixes #2061, @diml)

• With lang dune >= 1.10, rules in standard mode are no longer allowed to produce targets that are present in the source tree. This has been a warning for long enough (#2068, @diml)

• Allow %{...} variables in pps flags (#2076, @mlasson review by @diml and @aalekseyev).

• Add a 'cookies' option to ppx_rewriter/deriver flags in library stanzas. This allow to specify cookie requests from variables expanded at each invocation of the preprocessor. (#2106, @mlasson @diml)

• Add more opam metadata and use it to generate .opam files. In particular, a package field has been added to specify package specific information. (#2017, #2091, @avsm, @jonludlam, @rgrinberg)

• Clean up the special support for findlib.dynload. Before, Dune would simply match on the library name. Now, we only match on the findlib package name when the library doesn't come from Dune. Someone writing a library called findlib.dynload with Dune would have to add (special_builtin_support findlib_dynload) to trigger the special behavior. (#2115, @diml)

• Install the future_syntax preprocessor as ocaml-syntax-shims.exe (#2125, @rgrinberg)

• Hide full command on errors and warnings in development and show them in CI. (detected using the CI environment variable). Commands for which the invocation might be omitted must output an error prefixed with File . Add an --always-show-command-line option to disable this behavior and always show the full command. (#2120, fixes #1733, @rgrinberg)

• In dune-workspace files, add the ability to choose the host context and to create duplicates of the default context with different settings. (#2098, @TheLortex, review by @diml, @rgrinberg and @aalekseyev)

• Add support for hg in dune subst (#2135, @diml)

• Don't build documentation for implementations of virtual libraries (#2141, fixes #2138, @jonludlam)

• Fix generation of the -pp flag in .merlin (#2142, @rgrinberg)

• Make dune subst add a (version ...) field to the dune-project file (#2148, @diml)

• Add the %{os_type} variable, which is a short-hand for %{ocaml-config:os_type} (#1764, @diml)

• Allow enabled_if fields in library stanzas, restricted to the %{os_type}, %{model}, %{architecture}, %{system} variables (#1764, #2164 @diml, @rgrinberg)

• Fix chdir on external and source paths. Dune will also fail gracefully if the external or source path does not exist (#2165, fixes #2158, @rgrinberg)

• Support the .cc extension fro C++ sources (#2195, fixes #83, @rgrinberg)

• Run ocamlformat relative to the context root. This improves the locations of errors. (#2196, fixes #1370, @rgrinberg)

• Fix detection of README, LICENSE, CHANGE, and HISTORY files. These would be undetected whenever the project was nested in another workspace. (#2194, @rgrinberg)

• Fix generation of .merlin whenever there's more than one stanza with the same ppx preprocessing specification (#2209 ,fixes #2206, @rgrinberg)

• Fix generation of .merlin in the presence of the copy_files stanza and preprocessing specifications of other stanazs. (#2211, fixes #2206, @rgrinberg)

• Run refmt from the context's root directory. This improves error messages in case of syntax errors. (#2223, @rgrinberg)

• In .merlin files, don't pass -dump-ast to the future_syntax preprocessor. Merlin doesn't seem to like it when binary AST is generated by a -pp preprocessor. (#2236, @aalekseyev)

• dune install will verify that all files mentioned in all .install files exist before trying to install anything. This prevents partial installation of packages (#2230, @rgrinberg)

1.9.3 (06/05/2019)

• Fix .install files not being generated (#2124, fixes #2123, @rgrinberg)

1.9.2 (02/05/2019)

• Put back library variants in development mode. We discovered a serious unexpected issue and we might need to adjust the design of this feature before we are ready to commit to a final version. Users will need to write (using library_variants 0.1) in their dune-project file if they want to use it before the design is finalized. (#2116, @diml)

• Forbid to attach a variant to a library that implements a virtual library outside the current project (#2104, @rgrinberg)

• Fix a bug where dune install would install man pages to incorrect paths when compared to opam-installer. For example dune now installs (foo.1 as man1/foo.1) correctly and previously that was installed to man1/man1/foo.1. (#2105, @aalekseyev)

• Do not fail when a findlib directory doesn't exist (#2101, fix #2099, @diml)

• [coq] Rename (coqlib ...) to (coq.theory ...), support for coqlib will be dropped in the 1.0 version of the Coq language (#2055, @ejgallego)

• Fix crash when calculating library dependency closure (#2090, fixes #2085, @rgrinberg)

• Clean up the special support for findlib.dynload. Before, Dune would simply match on the library name. Now, we only match on the findlib package name when the library doesn't come from Dune. Someone writing a library called findlib.dynload with Dune would have to add (special_builton_support findlib_dynload) to trigger the special behavior. (#2115, @diml)

• Include permissions in the digest of targets and dependencies (#2121, fix #1426, @rgrinberg, @xclerc)

1.9.1 (11/04/2019)

• Fix invocation of odoc to add previously missing include paths, impacting mld files that are not in directories containing libraries (#2016, fixes #2007, @jonludlam)

1.9.0 (09/04/2019)

• Warn when generated .merlin does not reflect the preprocessing specification. This occurs when multiple stanzas in the same directory use different preprocessing specifications. This warning can now be disabled with allow_approx_merlin (#1947, fix #1946, @rgrinberg)

• Watch mode: display "Success" in green and "Had errors" in red (#1956, @emillon)

• Fix glob dependencies on installed directories (#1965, @rgrinberg)

• Add support for library variants and default implementations. (#1900, @TheLortex)

• Add experimental $ dune init command. This command is used to create or update project boilerplate. (#1448, fixes #159, @shonfeder)

• Experimental Coq support (fix #1466, @ejgallego)

• Install .cmi files of private modules in a .private directory (#1983, fix #1973 @rgrinberg)

• Fix dune subst attempting to substitute on directories. (#2000, fix #1997, @rgrinberg)

• Do not list private modules in the generated index. (#2009, fix #2008, @rgrinberg)

• Warn instead of failing if an opam file fails to parse. This opam file can still be used to define scope. (#2023, @rgrinberg)

• Do not crash if unable to read a directory when traversing to find root (#2024, @rgrinberg)

• Do not exit dune if some source directories are unreadable. Instead, warn the user that such directories need to be ignored (#2004, fix #310, @rgrinberg)

• Fix nested (binaries ..) fields in the env stanza. Previously, parent binaries fields would be ignored, but instead they should be combined. (#2029, @rgrinberg)

• Allow "." in c_names and cxx_names (#2036, fix #2033, @rgrinberg)

• Format rules: if a dune file uses OCaml syntax, do not format it. (#2014, fix #2012, @emillon)

1.8.2 (10/03/2019)

• Fix auto-generated index.mld. Use correct headings for the listing. (#1925, @rgrinberg, @aantron)

1.8.1 (08/03/2019)

• Correctly write dune-package when version is empty string (#1919, fix #1918, @rgrinberg)

1.8.0 (07/03/2019)

• Clean up watch mode polling loop: improves signal handling and error handling during polling (#1912, fix #1907, fix #1671, @aalekseyev)

• Change status messages during polling to be one-line, so that the messages are correctly erased by ^K. (#1912, @aalekseyev)

• Add support for .cxx extension for C++ stubs (#1831, @rgrinberg)

• Add DUNE_WORKSPACE variable. This variable is equivalent to setting --workspace in the command line. (#1711, fix #1503, @rgrinberg)

• Add c_flags and cxx_flags to env profile settings (#1700 and #1800, @gretay-js)

• Format dune printenv output (#1867, fix #1862, @emillon)

• Add the (promote-into <dir>) and `(promote-until-clean-into

  )` modes for `(rule ...)` stanzas, so that files can be promoted in another directory than the current one. For instance, this is used in merlin to promote menhir generated files in a directory that depends on the version of the compiler (#1890, @diml)

• Improve error message when dune subst fails (#1898, fix #1897, @rgrinberg)

• Add more GC counters to catapult traces (fix908, @rgrinberg)

• Add a preprocessor shim for the let+ syntax of OCaml 4.08 (#1899, implements #1891, @diml)

• Fix generation of .merlin files on Windows. \ characters needed to be escaped (#1869, @mlasson)

• Fix 0 error code when $ dune format-dune-file fails. (#1915, fix #1914, @rgrinberg)

• Configurator: deprecated query_expr and introduced query_expr_err which is the same but with a better error in case it fails. (#1886, @ejgallego)

• Make sure (menhir (mode promote) ...) stanzas are ignored when using --ignore-promoted-rules or -p (#1917, @diml)

1.7.3 (27/02/2019)

• Fix interpretation of META files containing archives with / in the filename. For instance, this was causing llvm to be unusable with dune (#1889, fix #1885, @diml)

• Make errors about menhir stanzas be located (#1881, fix #1876, @diml)

1.7.2 (21/02/2019)

• Add ${corrected-suffix}, ${library-name} and a few other variables to the list of variables to upgrade. This fixes the support for various framework producing corrections (#1840, #1853, @diml)

• Fix $ dune subst failing because the build directory wasn't set. (#1854, fix #1846, @rgrinberg)

• Configurator: Add warning to Pkg_config.query when a full package expression is used. Add Pkg_config.query_expr for cases when the full power of pkg-config's querying is needed (#1842, fix #1833, @rgrinberg)

• Fix unavailable, optional implementations eagerly breaking the build (#1857, fix #1856, @rgrinberg)

1.7.1 (13/02/2019)

• Fix the watch mode (#1837, #1839, fix #1836, @diml)

• Configurator: Fix misquoting when running pkg-config (#1835, fix #1833, @Chris00)

1.7.0 (12/02/2019)

• Second step of the deprecation of jbuilder: the jbuilder binary now emits a warning on every startup and both jbuilder and dune emit warnings when encountering jbuild files (#1752, @diml)

• Change the layout of build artifacts inside _build. The new layout enables optimizations that depend on the presence of .cmx files of private modules (#1676, @bobot)

• Fix merlin handling of private module visibility (#1653 @bobot)

• unstable-fmt: use boxes to wrap some lists (#1608, fix #1153, @emillon, thanks to @rgrinberg)

• skip directories when looking up programs in the PATH (#1628, fixes #1616, @diml)

• Use lsof on macOS to implement --stats (#1636, fixes #1634, @xclerc)

• Generate dune-package files for every package. These files are installed and read instead of META files whenever they are available (#1329, @rgrinberg)

• Fix preprocessing for libraries with (include_subdirs ..) (#1624, fix #1626, @nojb, @rgrinberg)

• Do not generate targets for archive that don't match the modes field. (#1632, fix #1617, @rgrinberg)

• When executing actions, open files lazily and close them as soon as possible in order to reduce the maximum number of file descriptors opened by Dune (#1635, #1643, fixes #1633, @jonludlam, @rgrinberg, @diml)

• Reimplement the core of Dune using a new generic memoization system (#1489, @rudihorn, @diml)

• Replace the broken cycle detection algorithm by a state of the art one from this paper (#1489, @rudihorn)

• Get the correct environment node for multi project workspaces (#1648, @rgrinberg)

• Add dune compute to call internal memoized functions (#1528, @rudihorn, @diml)

• Add --trace-file option to trace dune internals (#1639, fix #1180, @emillon)

• Add --no-print-directory (borrowed from GNU make) to suppress Entering directory messages. (#1668, @dra27)

• Remove --stats and track fd usage in --trace-file (#1667, @emillon)

• Add virtual libraries feature and enable it by default (#1430 fixes #921, @rgrinberg)

• Fix handling of Control+C in watch mode (#1678, fixes #1671, @diml)

• Look for jsoo runtime in the same dir as the js_of_ocaml binary when the ocamlfind package is not available (#1467, @nojb)

• Make the seq package available for OCaml >= 4.07 (#1714, @rgrinberg)

• Add locations to error messages where a rule fails to generate targets and rules that require files outside the build/source directory. (#1708, fixes #848, @rgrinberg)

• Let Configurator handle sizeof (in addition to negative numbers). (#1726, fixes #1723, @Chris00)

• Fix an issue causing menhir generated parsers to fail to build in some cases. The fix is to systematically use -short-paths when calling ocamlc -i (#1743, fix #1504, @diml)

• Never raise when printing located errors. The code that would print the location excerpts was prone to raising. (#1744, fix #1736, @rgrinberg)

• Add a dune upgrade command for upgrading jbuilder projects to Dune (#1749, @diml)

• When automatically creating a dune-project file, insert the detected name in it (#1749, @diml)

• Add (implicit_transitive_deps <bool>) mode to dune projects. When this mode is turned off, transitive dependencies are not accessible. Only listed dependencies are directly accessible. (#1734, #430, @rgrinberg, @hnrgrgr)

• Add toplevel stanza. This stanza is used to define toplevels with libraries already preloaded. (#1713, @rgrinberg)

• Generate .merlin files that account for normal preprocessors defined using a subset of the action language. (#1768, @rgrinberg)

• Emit (orig_src_dir <path>) metadata in dune-package for dune packages built with --store-orig-source-dir command line flag (also controlled by DUNE_STORE_ORIG_SOURCE_DIR env variable). This is later used to generate .merlin with S-directives pointed to original source locations and thus allowing merlin to see those. (#1750, @andreypopp)

• Improve the behavior of dune promote when the files to be promoted have been deleted. (#1775, fixes #1772, @diml)

• unstable-fmt: preserve comments (#1766, @emillon)

• Pass flags correctly when using staged_pps (#1779, fixes #1774, @diml)

• Fix an issue with the use of (mode promote) in the menhir stanza. It was previously causing intermediate mock files to be promoted (#1783, fixes #1781, @diml)

• unstable-fmt: ignore files using OCaml syntax (#1784, @emillon)

• Configurator: Add which function to replace the which command line utility in a cross platform way. (#1773, fixes #1705, @Chris00)

• Make configurator append paths to $PKG_CONFIG_PATH on macOS. Previously it was prepending paths and thus $PKG_CONFIG_PATH set by users could have been overridden by homebrew installed libraries (#1785, @andreypopp)

• Disallow c/cxx sources that share an object file in the same stubs archive. This means that foo.c and foo.cpp can no longer exist in the same library. (#1788, @rgrinberg)

• Forbid use of %{targets} (or ${@} in jbuild files) inside preprocessing actions (#1812, fixes #1811, @diml)

• Add DUNE_PROFILE environment variable to easily set the profile. (#1806, @rgrinberg)

• Deprecate the undocumented (no_keep_locs) field. It was only necessary until virtual libraries were supported (#1822, fix #1816, @diml)

• Rename unstable-fmt to format-dune-file and remove its --inplace option. (#1821, @emillon).

• Autoformatting: (using fmt 1.1) will also format dune files (#1821, @emillon).

• Autoformatting: record dependencies on .ocamlformat-ignore files (#1824, fixes #1793, @emillon)

1.6.2 (05/12/2018)

• Fix regression introduced by #1554 reported in: https://github.com/ocaml/dune/issues/734#issuecomment-444177134 (#1612, @rgrinberg)

• Fix dune external-lib-deps when preprocessors are not installed (#1607, @diml)

1.6.1 (04/12/2018)

• Fix hash collision for on-demand ppx rewriters once and for all (#1602, fixes #1524, @diml)

• Add dune external-lib-deps --sexp --unstable-by-dir so that the output can be easily processed by a machine (#1599, @diml)

1.6.0 (29/11/2018)

• Expand variables in install stanzas (#1354, @mseri)

• Add predicate language support for specifying sub directories. This allows the use globs, set operations, and special values in specifying the sub directories used for the build. For example: (dirs :standard \ lib*) will use all directories except those that start with lib. (#1517, #1568, @rgrinberg)

• Add binaries field to the (env ..) stanza. This field sets and overrides binaries for rules defined in a directory. (#1521, @rgrinberg)

• Fix a crash caused by using an extension in a project without dune-project file (#1535, fix #1529, @diml)

• Allow %{bin:..}, %{exe:..}, and other static expansions in the deps field. (#1155, fix #1531, @rgrinberg)

• Fix bad interaction between on-demand ppx rewriters and using multiple build contexts (#1545, @diml)

• Fix handling of installed .dune files when the backend is declared via a dune file (#1551, fixes #1549, @diml)

• Add a --stats command line option to record resource usage (#1543, @diml)

• Fix dune build @doc deleting highlight.pack.js on rebuilds, after the first build (#1557, @aantron).

• Allow targets to be directories, which Dune will treat opaquely (#1547, @jordwalke)

• Support for OCaml 4.08: List.t is now provided by OCaml (#1561, @ejgallego)

• Exclude the local esy directory (_esy) from the list of watched directories (#1578, @andreypopp)

• Fix the output of dune external-lib-deps (#1594, @diml)

• Introduce data_only_dirs to replace ignored_subdirs. ignored_subdirs is deprecated since 1.6. (#1590, @rgrinberg)

1.5.1 (7/11/2018)

• Fix dune utop <dir> when invoked from a sub-directory of the project (#1520, fix #1518, @diml)

• Fix bad interaction between on-demand ppx rewriters and polling mode (#1525, fix #1524, @diml)

1.5.0 (1/11/2018)

• Filter out empty paths from OCAMLPATH and PATH (#1436, @rgrinberg)

• Do not add the lib.cma.js target in lib's directory. Put this target in a sub directory instead. (#1435, fix #1302, @rgrinberg)

• Install generated OCaml files with a .ml rather than a .ml-gen extension (#1425, fix #1414, @rgrinberg)

• Allow to use the bigarray library in >= 4.07 without ocamlfind and without installing the corresponding otherlib. (#1455, @nojb)

• Add @all alias to build all targets defined in a directory (#1409, fix #1220, @rgrinberg)

• Add @check alias to build all targets required for type checking and tooling support. (#1447, fix #1220, @rgrinberg)

• Produce the odoc index page with the content wrapper to make it consistent with odoc's theming (#1469, @rizo)

• Unblock signals in processes started by dune (#1461, fixes #1451, @diml)

• Respect OCAMLFIND_TOOLCHAIN and add a toolchain option to contexts in the workspace file. (#1449, fix #1413, @rgrinberg)

• Fix error message when using copy_files stanza to copy files from a non sub directory with lang set to dune < 1.3 (#1486, fixes #1485, @NathanReb)

• Install man pages in the correct subdirectory (#1483, fixes #1441, @emillon)

• Fix version syntax check for test stanza's action field. Only emits a warning for retro-compatibility (#1474, fixes #1471, @NathanReb)

• Interpret the DESTDIR environment variable (#1475, @emillon)

• Fix interpretation of paths in env stanzas (#1509, fixes #1508, @diml)

• Add context_name expansion variable (#1507, @rgrinberg)

• Use shorter paths for generated on-demand ppx drivers. This is to help Windows builds where paths are limited in length (#1511, fixes #1497, @diml)

• Fix interpretation of environment variables under setenv. Also forbid dynamic environment names or values (#1503, @rgrinberg).

1.4.0 (10/10/2018)

• Do not fail if the output of ocamlc -config doesn't include standard_runtime (#1326, @diml)

• Let Configurator.V1.C_define.import handle negative integers (#1334, @Chris00)

• Re-execute actions when a target is modified by the user inside _build (#1343, fix #1342, @diml)

• Pass --set-switch to opam (#1341, fix #1337, @diml)

• Fix bad interaction between multi-directory libraries the menhir stanza (#1373, fix #1372, @diml)

• Integration with automatic formatters (#1252, fix #1201, @emillon)

• Better error message when using (self_build_stubs_archive ...) and (c_names ...) or (cxx_names ...) simultaneously. (#1375, fix #1306, @nojb)

• Improve name detection for packages when the prefix isn't an actual package (#1361, fix #1360, @rgrinberg)

• Support for new menhir rules (#863, fix #305, @fpottier, @rgrinberg)

• Do not remove flags when compiling compatibility modules for wrapped mode (#1382, fix #1364, @rgrinberg)

• Fix reason support when using staged_pps (#1384, @charlesetc)

• Add support for enabled_if in rule, menhir, ocamllex, ocamlyacc (#1387, @diml)

• Exit gracefully when a signal is received (#1366, @diml)

• Load all defined libraries recursively into utop (#1384, fix #1344, @rgrinberg)

• Allow to use libraries bytes, result and uchar without findlib installed (#1391, @nojb)

• Take argument to self_build_stubs_archive into account. (#1395, @nojb)

• Fix bad interaction between env customization and vendored projects: when a vendored project didn't have its own env stanza, the env stanza from the enclosing project was in effect (#1408, @diml)

• Fix stop early bug when scanning for watermarks (#1423, @struktured)

1.3.0 (23/09/2018)

• Support colors on Windows (#1290, @diml)

• Allow dune.configurator and base to be used together (#1291, fix #1167, @diml)

• Support interrupting and restarting builds on file changes (#1246, @kodek16)

• Fix findlib-dynload support with byte mode only (#1295, @bobot)

• Make dune rules -m output a valid makefile (#1293, @diml)

• Expand variables in (targets ..) field (#1301, #1320, fix #1189, @nojb, @rgrinberg, @diml)

• Fix a race condition on Windows that was introduced in 1.2.0 (#1304, fix #1303, @diml)

• Fix the generation of .merlin files to account for private modules (@rgrinberg, fix #1314)

• Exclude the local opam switch directory (_opam) from the list of watched directories (#1315, @dysinger)

• Fix compilation of the module generated for findlib.dynload (#1317, fix #1310, @diml)

• Lift restriction on copy_files and copy_files# stanzas that files to be copied should be in a subdirectory of the current directory. (#1323, fix #911, @nojb)

1.2.1 (17/09/2018)

• Enrich the dune Emacs mode with syntax highlighting and indentation. New file dune-flymake to provide a hook dune-flymake-dune-mode-hook to enable linting of dune files. (#1265, @Chris00)

• Pass link_flags to cc when compiling with Configurator.V1.c_test (#1274, @rgrinberg)

• Fix digest calculation of aliases. It should take into account extra bindings passed to the alias (#1277, fix #1276, @rgrinberg)

• Fix a bug causing dune to fail eagerly when an optional library isn't available (#1281, @diml)

• ocamlmklib should use response files only if ocaml >= 4.08 (#1268, @bryphe)

1.2.0 (14/09/2018)

• Ignore stderr output when trying to find out the number of jobs available (#1118, fix #1116, @diml)

• Fix error message when the source directory of copy_files does not exist. (#1120, fix #1099, @emillon)

• Highlight error locations in error messages (#1121, @emillon)

• Display actual stanza when package is ambiguous (#1126, fix #1123, @emillon)

• Add dune unstable-fmt to format dune files. The interface and syntax are still subject to change, so use with caution. (#1130, fix #940, @emillon)

• Improve error message for dune utop without a library name (#1154, fix #1149, @emillon)

• Fix parsing ocamllex stanza in jbuild files (#1150, @rgrinberg)

• Highlight multi-line errors (#1131, @anuragsoni)

• Do no try to generate shared libraries when this is not supported by the OS (#1165, fix #1051, @diml)

• Fix Flags.write_{sexp,lines} in configurator by avoiding the use of Stdune.Path (#1175, fix #1161, @rgrinberg)

• Add support for findlib.dynload: when linking an executable using findlib.dynload, automatically record linked in libraries and findlib predicates (#1172, @bobot)

• Add support for promoting a selected list of files (#1192, @diml)

• Add an emacs mode providing helpers to promote correction files (#1192, @diml)

• Improve message suggesting to remove parentheses (#1196, fix #1173, @emillon)

• Add (wrapped (transition "..message..")) as an option that will generate wrapped modules but keep unwrapped modules with a deprecation message to preserve compatibility. (#1188, fix #985, @rgrinberg)

• Fix the flags passed to the ppx rewriter when using staged_pps (#1218, @diml)

• Add (env var) to add a dependency to an environment variable. (#1186, @emillon)

• Add a simple version of a polling mode: dune build -w keeps running and restarts the build when something change on the filesystem (#1140, @kodek16)

• Cleanup the way we detect the library search path. We no longer call opam config var lib in the default build context (#1226, @diml)

• Make test stanzas honor the -p flag. (#1236, fix #1231, @emillon)

• Test stanzas take an optional (action) field to customize how they run (#1248, #1195, @emillon)

• Add support for private modules via the private_modules field (#1241, fix #427, @rgrinberg)

• Add support for passing arguments to the OCaml compiler via a response file when the list of arguments is too long (#1256, @diml)

• Do not print diffs by default when running inside dune (#1260, @diml)

• Interpret $ dune build dir as building the default alias in dir. (#1259, @rgrinberg)

• Make the dynlink library available without findlib installed (#1270, fix #1264, @rgrinberg)

1.1.1 (08/08/2018)

• Fix $ jbuilder --dev (#1104, fixes #1103, @rgrinberg)

• Fix dune exec when --build-dir is set to an absolute path (#1105, fixes #1101, @rgrinberg)

• Fix duplicate profile argument in suggested command when an external library is missing (#1109, #1106, @emillon)

• -opaque wasn't correctly being added to modules without an interface. (#1108, fix #1107, @rgrinberg)

• Fix validation of library name fields and make sure this validation also applies when the name is derived from the public_name. (#1110, fix #1102, @rgrinberg)

• Fix a bug causing the toplevel env stanza in the workspace file to be ignored when at least one context had (merlin) (#1114, @diml)

1.1.0 (06/08/2018)

• Fix lookup of command line specified files when --root is given. Previously, passing in --root in conjunction with --workspace or --config would not work correctly (#997, @rgrinberg)

• Add support for customizing env nodes in workspace files. The env stanza is now allowed in toplevel position in the workspace file, or for individual contexts. This feature requires (dune lang 1.1) (#1038, @rgrinberg)

• Add enabled_if field for aliases and tests. This field controls whether the test will be ran using a boolean expression language. (#819, @rgrinberg)

• Make name, names fields optional when a public_name, public_names field is provided. (#1041, fix #1000, @rgrinberg)

• Interpret X in --libdir X as relative to PREFIX when X is relative (#1072, fix #1070, @diml)

• Add support for multi directory libraries by writing (include_subdirs unqualified) (#1034, @diml)

• Add (staged_pps ...) to support staged ppx rewriters such as ones using the OCaml typer like ppx_import (#1080, fix #193, @diml)

• Use -opaque in the dev profile. This option trades off binary quality for compilation speed when compiling .cmx files. (#1079, fix #1058, @rgrinberg)

• Fix placeholders in dune subst documentation (#1090, @emillon, thanks @trefis for the bug report)

• Add locations to errors when a missing binary in PATH comes from a dune file (#1096, fixes #1095, @rgrinberg)

1.0.1 (19/07/2018)

• Fix parsing of %{lib:name:file} forms (#1022, fixes #1019, @diml)

1.0.0 (10/07/2018)

• Do not load the user configuration file when running inside dune (#700 @diml)

• Do not infer ${null} to be a target (#693 fixes #694 @rgrinberg)

• Introduce jbuilder.configurator library. This is a revived version of janestreet's configurator library with better cross compilation support, a versioned API, and no external dependencies. (#673, #678 #692, #695 @rgrinberg)

• Register the transitive dependencies of compilation units as the compiler might read .cm* files recursively (#666, fixes #660, @emillon)

• Fix a bug causing jbuilder external-lib-deps to crash (#723, @diml)

• -j now defaults to the number of processing units available rather 4 (#726, @diml)

• Fix attaching index.mld to documentation (#731, fixes #717 @rgrinberg)

• Scan the file system lazily (#732, fixes #718 and #228, @diml)

• Add support for setting the default ocaml flags and for build profiles (#419, @diml)

• Display a better error messages when writing (inline_tests) in an executable stanza (#748, @diml)

• Restore promoted files when they are deleted or changed in the source tree (#760, fix #759, @diml)

• Fix a crash when using an invalid alias name (#762, fixes #761, @diml)

• Fix a crash when using c files from another directory (#758, fixes #734, @diml)

• Add an ignored_subdirs stanza to replace jbuild-ignore files (#767, @diml)

• Fix a bug where Dune ignored previous occurrences of duplicated fields (#779, @diml)

• Allow setting custom build directories using the --build-dir flag or DUNE_BUILD_DIR environment variable (#846, fix #291, @diml @rgrinberg)

• In dune files, remove support for block (#| ... |#)) and sexp (#;) comments. These were very rarely used and complicate the language (#837, @diml)

• In dune files, add support for block strings, allowing to nicely format blocks of texts (#837, @diml)

• Remove hard-coded knowledge of ppx_driver and ocaml-migrate-parsetree when using a dune file (#576, @diml)

• Make the output of Dune slightly more deterministic when run from inside Dune (#855, @diml)

• Simplify quoting behavior of variables. All values are now multi-valued and whether a multi valued variable is allowed is determined by the quoting and substitution context it appears in. (#849, fix #701, @rgrinberg)

• Fix documentation generation for private libraries. (#864, fix #856, @rgrinberg)

• Use Marshal to store digest and incremental databases. This improves the speed of 0 rebuilds. (#817, @diml)

• Allow setting environment variables in findlib.conf for cross compilation contexts. (#733, @rgrinberg)

• Add a link_deps field to executables, to specify link-time dependencies like version scripts. (#879, fix #852, @emillon)

• Rename files_recursively_in to source_tree to make it clearer it doesn't include generated files (#899, fix #843, @diml)

• Present the menhir stanza as an extension with its own version (#901, @diml)

• Improve the syntax of flags in (pps ...). Now instead of (pps (ppx1 -arg1 ppx2 (-foo x))) one should write (pps ppx1 -arg ppx2 -- -foo x) which looks nicer (#910, @diml)

• Make (diff a b) ignore trailing cr on Windows and add (cmp a b) for comparing binary files (#904, fix #844, @diml)

• Make dev the default build profile (#920, @diml)

• Version dune-workspace and ~/.config/dune/config files (#932, @diml)

• Add the ability to build an alias non-recursively from the command line by writing @@alias (#926, @diml)

• Add a special default alias that defaults to (alias_rec install) when not defined by the user and make @@default be the default target (#926, @diml)

• Forbid #require in dune files in OCaml syntax (#938, @diml)

• Add %{profile} variable. (#938, @rgrinberg)

• Do not require opam-installer anymore (#941, @diml)

• Add the lib_root and libexec_root install sections (#947, @diml)

• Rename path:file to dep:file (#944, @emillon)

• Remove path-no-dep:file (#948, @emillon)

• Adapt the behavior of dune subst for dune projects (#960, @diml)

• Add the lib_root and libexec_root sections to install stanzas (#947, @diml)

• Add a Configurator.V1.Flags module that improves the flag reading/writing API (#840, @avsm)

• Add a tests stanza that simlpified defining regular and expect tests (#822, @rgrinberg)

• Change the subst subcommand to lookup the project name from the dune-project whenever it's available. (#960, @diml)

• The subst subcommand no longer looks up the root workspace. Previously this detection would break the command whenever -p wasn't passed. (#960, @diml)

• Add a # DUNE_GEN in META template files. This is done for consistency with # JBUILDER_GEN. (#958, @rgrinberg)

• Rename the following variables in dune files:

  • SCOPE_ROOT to project_root

  • @ to targets

  • ^ to deps < was renamed in this PR and latter deleted in favor or named dependencies. (#957, @rgrinberg)

• Rename ROOT to workspace_root in dune files (#993, @diml)

• Lowercase all built-in %{variables} in dune files (#956, @rgrinberg)

• New syntax for naming dependencies: (deps (:x a b) (:y (glob_files *.c*))). This replaces the use for ${<} in dune files. (#950, @diml, @rgrinberg)

• Fix detection of dynamic cycles, which in particular may appear when using (package ..) dependencies (#988, @diml)

1.0+beta20 (10/04/2018)

• Add a documentation stanza. This stanza allows one to attach .mld files to opam packages. (#570 @rgrinberg)

• Execute all actions (defined using (action ..)) in the context's environment. (#623 @rgrinberg)

• Add a (universe) special dependency to specify that an action depend on everything in the universe. Jbuilder cannot cache the result of an action that depend on the universe (#603, fixes #255 @diml)

• Add a (package <package>) dependency specification to indicate dependency on a whole package. Rules depending on whole package will be executed in an environment similar to the one we get once the package is installed (#624, @rgrinberg and @diml)

• Don't pass -runtime-variant _pic on Windows (#635, fixes #573 @diml)

• Display documentation in alphabetical order. This is relevant to packages, libraries, and modules. (#647, fixes #606 @rgrinberg)

• Missing asm in ocaml -config on bytecode only architecture is no longer fatal. The same kind of fix is preemptively applied to C compilers being absent. (#646, fixes $637 @rgrinberg)

• Use the host's PATH variable when running actions during cross compilation (#649, fixes #625 @rgrinberg)

• Fix incorrect include (-I) flags being passed to odoc. These flags should be directories that include .odoc files, rather than the include flags of the libraries. (#652 fixes #651 @rgrinberg)

• Fix a regression introduced by beta19 where the generated merlin files didn't include the right -ppx flags in some cases (#658 fixes #657 @diml)

• Fix error message when a public library is defined twice. Before jbuilder would raise an uncaught exception (Fixes #661, @diml)

• Fix several cases where external-lib-deps was returning too little dependencies (#667, fixes #644 @diml)

• Place module list on own line in generated entry point mld (#670 @antron)

• Cosmetic improvements to generated entry point mld (#653 @trefis)

• Remove most useless parentheses from the syntax (#915, @diml)

1.0+beta19.1 (21/03/2018)

• Fix regression introduced by beta19 where duplicate environment variables in Unix.environ would cause a fatal error. The first defined environment variable is now chosen. (#638 fixed by #640)

• Use ';' as the path separator for OCAMLPATH on Cygwin (#630 fixed by #636 @diml).

• Use the contents of the OCAMLPATH environment variable when not relying on ocamlfind (#642 @diml)

1.0+beta19 (14/03/2018)

• Ignore errors during the generation of the .merlin (#569, fixes #568 and #51)

• Add a workaround for when a library normally installed by the compiler is not installed but still has a META file (#574, fixes #563)

• Do not depend on ocamlfind. Instead, hard-code the library path when installing from opam (#575)

• Change the default behavior regarding the check for overlaps between local and installed libraries. Now even if there is no link time conflict, we don't allow an external dependency to overlap with a local library, unless the user specifies allow_overlapping_dependencies in the jbuild file (#587, fixes #562)

• Expose a few more variables in jbuild files: ext_obj, ext_asm, ext_lib, ext_dll and ext_exe as well as ${ocaml-config:XXX} for most variables in the output of ocamlc -config (#590)

• Add support for inline and inline expectation tests. The system is generic and should support several inline test systems such as ppx_inline_test, ppx_expect or qtest (#547)

• Make sure modules in the current directory always have precedence over included directories (#597)

• Add support for building executables as object or shared object files (#23)

• Add a best mode which is native with fallback to byte-code when native compilation is not available (#23)

• Fix locations reported in error messages (#609)

• Report error when a public library has a private dependency. Previously, this would be silently ignored and install broken artifacts (#607).

• Fix display when output is not a tty (#518)

1.0+beta18.1 (14/03/2018)

• Reduce the number of simultaneously opened fds (#578)

• Always produce an implementation for the alias module, for non-jbuilder users (Fix #576)

• Reduce interleaving in the scheduler in an attempt to make Jbuilder keep file descriptors open for less long (#586)

• Accept and ignore upcoming new library fields: ppx.driver, inline_tests and inline_tests.backend (#588)

• Add a hack to be able to build ppxlib, until beta20 which will have generic support for ppx drivers

1.0+beta18 (25/02/2018)

• Fix generation of the implicit alias module with 4.02. With 4.02 it must have an implementation while with OCaml >= 4.03 it can be an interface only module (#549)

• Let the parser distinguish quoted strings from atoms. This makes possible to use "${v}" to concatenate the list of values provided by a split-variable. Concatenating split-variables with text is also now required to be quoted.

• Split calls to ocamldep. Before ocamldep would be called once per library/executables stanza. Now it is called once per file (#486)

• Make sure to not pass -I <stdlib-dir> to the compiler. It is useless and it causes problems in some cases (#488)

• Don't stop on the first error. Before, jbuilder would stop its execution after an error was encountered. Now it continues until all branches have been explored (#477)

• Add support for a user configuration file (#490)

• Add more display modes and change the default display of Jbuilder. The mode can be set from the command line or from the configuration file (#490)

• Allow to set the concurrency level (-j N) from the configuration file (#491)

• Store artifacts for libraries and executables in separate directories. This ensure that Two libraries defined in the same directory can't see each other unless one of them depend on the other (#472)

• Better support for mli/rei only modules (#489)

• Fix support for byte-code only architectures (#510, fixes #330)

• Fix a regression in external-lib-deps introduced in 1.0+beta17 (#512, fixes #485)

• @doc alias will now build only documentation for public libraries. A new @doc-private alias has been added to build documentation for private libraries.

• Refactor internal library management. It should now be possible to run jbuilder build @lint in Base for instance (#516)

• Fix invalid warning about non-existent directory (#536, fixes #534)

1.0+beta17 (01/02/2018)

• Make jbuilder aware that num is an external package in OCaml >= 4.06.0 (#358)

• jbuilder exec will now rebuild the executable before running it if necessary. This can be turned off by passing --no-build (#345)

• Fix jbuilder utop to work in any working directory (#339)

• Fix generation of META synopsis that contains double quotes (#337)

• Add S . to .merlin by default (#284)

• Improve jbuilder exec to make it possible to execute non public executables. jbuilder exec path/bin will execute bin inside default (or specified) context relative to path. jbuilder exec /path will execute /path as absolute path but with the context's environment set appropriately. Lastly, jbuilder exec will change the root as to which paths are relative using the -root option. (#286)

• Fix jbuilder rules printing rules when some binaries are missing (#292)

• Build documentation for non public libraries (#306)

• Fix doc generation when several private libraries have the same name (#369)

• Fix copy# for C/C++ with Microsoft C compiler (#353)

• Add support for cross-compilation. Currently we are supporting the opam-cross-x repositories such as opam-cross-windows (#355)

• Simplify generated META files: do not generate the transitive closure of dependencies in META files (#405)

• Deprecated ${!...}: the split behavior is now a property of the variable. For instance ${CC}, ${^}, ${read-lines:...} all expand to lists unless used in the middle of a longer atom (#336)

• Add an (include ...) stanza allowing one to include another non-generated jbuild file in the current file (#402)

• Add a (diff <file1> <file2>) action allowing to diff files and promote generated files in case of mismatch (#402, #421)

• Add jbuilder promote and --auto-promote to promote files (#402, #421)

• Report better errors when using (glob_files ...) with a directory that doesn't exist (#413, Fix #412)

• Jbuilder now properly handles correction files produced by ppx_driver. This allows to use [@@deriving_inline] in .ml/.mli files. This require ppx_driver >= v0.10.2 to work properly (#415)

• Make jbuilder load rules lazily instead of generating them all eagerly. This speeds up the initial startup time of jbuilder on big workspaces (#370)

• Now longer generate a META.pkg.from-jbuilder file. Now the only way to customize the generated META file is through META.pkg.template. This feature was unused and was making the code complicated (#370)

• Remove read-only attribute on Windows before unlink (#247)

• Use /Fo instead of -o when invoking the Microsoft C compiler to eliminate deprecation warning when compiling C++ sources (#354)

• Add a mode field to rule stanzas:

  • (mode standard) is the default

  • (mode fallback) replaces (fallback)

  • (mode promote) means that targets are copied to the source tree after the rule has completed

  • (mode promote-until-clean) is the same as (mode promote) except that jbuilder clean deletes the files copied to the source tree. (#437)

• Add a flag --ignore-promoted-rules to make jbuilder ignore rules with (mode promote). -p implies --ignore-promoted-rules (#437)

• Display a warning for invalid lines in jbuild-ignore (#389)

• Always build boot.exe as a bytecode program. It makes the build of jbuilder faster and fix the build on some architectures (#463, fixes #446)

• Fix bad interaction between promotion and incremental builds on OSX (#460, fix #456)

• Make the beginning of a new build more explicit in watch mode (#2542 @diml)

1.0+beta16 (05/11/2017)

• Fix build on 32-bit OCaml (#313)

1.0+beta15 (04/11/2017)

• Change the semantic of aliases: there are no longer aliases that are recursive such as install or runtest. All aliases are non-recursive. However, when requesting an alias from the command line, this request the construction of the alias in the specified directory and all its children recursively. This allows users to get the same behavior as previous recursive aliases for their own aliases, such as example. Inside jbuild files, one can use (deps (... (alias_rec xxx) ...)) to get the same behavior as on the command line. (#268)

• Include sub libraries that have a . in the generated documentation index (#280).

• Fix "up" links to the top-level index in the odoc generated documentation (#282).

• Fix ARCH_SIXTYFOUR detection for OCaml 4.06.0 (#303)

1.0+beta14 (11/10/2017)

• Add (copy_files ) and (copy_files# ) stanzas. These stanzas setup rules for copying files from a sub-directory to the current directory. This provides a reasonable way to support multi-directory library/executables in jbuilder (#35, @bobot)

• An empty jbuild-workspace file is now interpreted the same as one containing just (context default)

• Better support for on-demand utop toplevels on Windows and when the library has C stubs

• Print Entering directory '...' when the workspace root is not the current directory. This allows Emacs and Vim to know where relative filenames should be interpreted from. Fixes #138

• Fix a bug related to menhir stanzas: menhir stanzas with a merge_into field that were in jbuild files in sub-directories where incorrectly interpreted (#264)

• Add support for locks in actions, for tests that can't be run concurrently (#263)

• Support ${..} syntax in the include stanza. (#231)

1.0+beta13 (05/09/2017)

• Generate toplevel html index for documentation (#224, @samoht)

• Fix recompilation of native artifacts. Regression introduced in the last version (1.0+beta12) when digests replaces timestamps for checking staleness (#238, @dra27)

1.0+beta12 (18/08/2017)

• Fix the quoting of FLG lines in generated .merlin files (#200, @mseri)

• Use the full path of archive files when linking. Before jbuilder would do: -I <path> file.cmxa, now it does -I <path> <path>/file.cmxa. Fixes #118 and #177

• Use an absolute path for ppx drivers in .merlin files. Merlin <3.0.0 used to run ppx commands from the directory where the .merlin was present but this is no longer the case

• Allow to use jbuilder install in contexts other than opam; if ocamlfind is present in the PATH and the user didn't pass --prefix or --libdir explicitly, use the output of ocamlfind printconf destdir as destination directory for library files (#179, @bobot)

• Allow (:include ...) forms in all *flags fields (#153, @dra27)

• Add a utop subcommand. Running jbuilder utop in a directory builds and executes a custom utop toplevel with all libraries defined in the current directory (#183, @rgrinberg)

• Do not accept per_file anymore in preprocess field. per_file was renamed per_module and it is planned to reuse per_file for another purpose

• Warn when a file is both present in the source tree and generated by a rule. Before, jbuilder would silently ignore the rule. One now has to add a field (fallback) to custom rules to keep the current behavior (#218)

• Get rid of the deprecated-ppx-method findlib package for ppx rewriters (#222, fixes #163)

• Use digests (MD5) of files contents to detect changes rather than just looking at the timestamps. We still use timestamps to avoid recomputing digests. The performance difference is negligible and we avoid more useless recompilations, especially when switching branches for instance (#209, fixes #158)

1.0+beta11 (21/07/2017)

• Fix the error message when there are more than one <package>.opam file for a given package

• Report an error when in a wrapped library, a module that is not the toplevel module depends on the toplevel module. This doesn't make as such a module would in theory be inaccessible from the outside

• Add ${SCOPE_ROOT} pointing to the root of the current scope, to fix some misuses of ${ROOT}

• Fix useless hint when all missing dependencies are optional (#137)

• Fix a bug preventing one from generating META.pkg.template with a custom rule (#190)

• Fix compilation of reason projects: .rei files where ignored and caused the build to fail (#184)

1.0+beta10 (08/06/2017)

• Add a clean subcommand (@rdavison, #89)

• Add support for generating API documentation with odoc (#74)

• Don't use unix in the bootstrap script, to avoid surprises with Cygwin

• Improve the behavior of jbuilder exec on Windows

• Add a --no-buffer option to see the output of commands in real-time. Should only be used with -j1

• Deprecate per_file in preprocessing specifications and rename it per_module

• Deprecate copy-and-add-line-directive and rename it copy#

• Remove the ability to load arbitrary libraries in jbuild file in OCaml syntax. Only unix is supported since a few released packages are using it. The OCaml syntax might eventually be replaced by a simpler mechanism that plays better with incremental builds

• Properly define and implement scopes

• Inside user actions, ${^} now includes files matches by (glob_files ...) or (file_recursively_in ...)

• When the dependencies and targets of a rule can be inferred automatically, you no longer need to write them: (rule (copy a b))

• Inside (run ...), ${xxx} forms that expands to lists can now be split across multiple arguments by adding a !: ${!xxx}. For instance: (run foo ${!^})

• Add support for using the contents of a file inside an action:

  • ${read:<file>}

  • ${read-lines:<file>}

  • ${read-strings:<file>} (same as read-lines but lines are escaped using OCaml convention)

• When exiting prematurely because of a failure, if there are other background processes running and they fail, print these failures

• With msvc, -lfoo is transparently replaced by foo.lib (@dra27, #127)

• Automatically add the .exe when installing executables on Windows (#123)

• (run <prog> ...) now resolves <prog> locally if possible. i.e. (run ${bin:prog} ...) and (run prog ...) behave the same. This seems like the right default

• Fix a bug where jbuild rules would crash instead of reporting a proper build error

• Fix a race condition in future.ml causing jbuilder to crash on Windows in some cases (#101)

• Fix a bug causing ppx rewriter to not work properly when using multiple build contexts (#100)

• Fix .merlin generation: projects in the same workspace are added to merlin's source path, so "locate" works on them.

1.0+beta9 (19/05/2017)

• Add support for building Reason projects (@rgrinberg, #58)

• Add support for building javascript with js-of-ocaml (@hhugo, #60)

• Better support for topkg release workflow. See topkg-jbuilder for more details

• Port the manual to rst and setup a jbuilder project on readthedocs.org (@rgrinberg, #78)

• Hint for mistyped targets. Only suggest correction on the basename for now, otherwise it's slow when the workspace is big

• Add a (package ...) field for aliases, so that one can restrict tests to a specific package (@rgrinberg, #64)

• Fix a couple of bugs on Windows:

  • fix parsing of end of lines in some cases

  • do not take the case into account when comparing environment variable names

• Add AppVeyor CI

• Better error message in case a chain of dependencies crosses the installed world

• Better error messages for invalid dependency list in jbuild files

• Several improvements/fixes regarding the handling of findlib packages:

  • Better error messages when a findlib package is unavailable

  • Don't crash when an installed findlib package has missing dependencies

  • Handle the findlib alternative directory layout which is still used by a few packages

• Add jbuilder installed-libraries --not-available explaining why some libraries are not available

• jbuilder now records dependencies on files of external libraries. This mean that when you upgrade a library, jbuilder will know what need to be rebuilt.

• Add a jbuilder rules subcommand to dump internal compilation rules, mostly for debugging purposes

• Ignore all directories starting with a . or _. This seems to be a common pattern:

  • .git, .hg, _darcs

  • _build

  • _opam (opam 2 local switches)

• Fix the hint for jbuilder external-lib-deps (#72)

• Do not require ocamllex and ocamlyacc to be at the same location as ocamlc (#75)

1.0+beta8 (17/04/2017)

• Added ${lib-available:<library-name>} which expands to true or false with the same semantic as literals in (select ...) stanzas

• Remove hard-coded knowledge of a few specific ppx rewriters to ease maintenance moving forward

• Pass the library name to ppx rewriters via the library-name cookie

• Fix: make sure the action working directory exist before running it

1.0+beta7 (12/04/2017)

• Make the output quieter by default and add a --verbose argument (@stedolan, #40)

• Various documentation fixes (@adrieng, #41)

• Make @install the default target when no targets are specified (@stedolan, #47)

• Add predefined support for menhir, similar to ocamlyacc support (@rgrinberg, #42)

• Add internal support for sandboxing actions and sandbox the build of the alias module with 4.02 to workaround the compiler trying to read the cmi of the aliased modules

• Allow to disable dynlink support for libraries via (no_dynlink) (#55)

• Add a -p/--for-release-of-packages command line argument to simplify the jbuilder invocation in opam files and make it more future proof (#52)

• Fix the lookup of the executable in jbuilder exec foo. Before, even if foo was to be installed, the freshly built version wasn't selected

• Don't generate a exists_if ... lines in META files. These are useless sine the META files are auto-generated

1.0+beta6 (29/03/2017)

• Add an (executable ...) stanza for single executables (#33)

• Add a (package ...) and (public_name <name>)/(public_names (<names)) to executable/executables stanzas to make it easier to install executables (#33)

• Fix a bug when using specific rewriters that jbuilder knows about without ppx_driver.runner (#37). These problem should go away soon when we start using --cookie

• Fix the interpretation of META files when there is more than one applicable assignment. Before this fix, the one with the lowest number of formal predicates was selected instead of the one with the biggest number of formal predicates

1.0+beta5 (22/03/2017)

• When ocamlfind is present in the PATH, do not attempt to call opam config var lib

• Make sure the build of jbuilder itself never calls ocamlfind or opam

• Better error message when a jbuild file in OCaml syntax forgets to call Jbuild_plugin.V*.send

• Added examples of use

• Don't drop inline tests/benchmarks by default

1.0+beta4 (20/03/2017)

• Improve error messages about invalid/missing pkg.opam files

• Ignore all errors while running ocamlfind printconf path

1.0+beta3 (15/03/2017)

• Print optional dependencies as optional in the output of jbuilder external-lib-deps --missing

• Added a few forms to the DSL:

  • with-{stderr,outputs}-to

  • ignore-{stdout,stderr,outputs}

• Added ${null} which expands to /dev/null on Unix and NUL on Windows

• Improve the doc generated by odoc for wrapped libraries

• Improve the error reported when an installed package depends on a library that is not installed

• Documented (files_recursively_in ...)

• Added black box tests

• Fix a bug where jbuilder would crash when there was no <package>.opam file

• Fixed a bug where .merlin files where not generated at the root of the workspace (#20)

• Fix a bug where a (glob_files ...) would cause other dependencies to be ignored

• Fix the generated ppx(...) line in META files

• Fix (optional) when a ppx runtime dependency is not available (#24)

• Do not crash when an installed package that we don't need has missing dependencies (#25)

1.0+beta2 (10/03/2017)

• Simplified the rules for finding the root of the workspace as the old ones were often picking up the home directory. New rules are:

  • look for a jbuild-workspace file in parent directories

  • look for a jbuild-workspace* file in parent directories

  • use the current directory

• Fixed the expansion of ${ROOT} in actions

• Install quick-start.org in the documentation directory

• Add a few more things in the log file to help debugging

1.0+beta1 (07/03/2017)

• Added a manual

• Support incremental compilation

• Switched the CLI to cmdliner and added a build command (#5, @rgrinberg)

• Added a few commands:

  • runtest

  • install

  • uninstall

  • installed-libraries

  • exec: execute a command in an environment similar to what you would get after jbuilder install

• Removed the build-package command in favor of a --only-packages option that is common to all commands

• Automatically generate .merlin files (#2, @rdavison)

• Improve the output of jbuilder, in particular don't mangle the output of commands when using -j N with N > 1

• Generate a log in _build/log

• Versioned the jbuild format and added a first stable version. You should now put (jbuilder_version 1) in a jbuild file at the root of your project to ensure forward compatibility

• Switch from ppx_driver to ocaml-migrate-parsetree.driver. In order to use ppx rewriters with Jbuilder, they need to use ocaml-migrate-parsetree.driver

• Added support for aliases (#7, @rgrinberg)

• Added support for compiling against multiple opam switch simultaneously by writing a jbuild-worspace file

• Added support for OCaml 4.02.3

• Added support for architectures that don't have natdynlink

• Search the root according to the rules described in the manual instead of always using the current directory

• extended the action language to support common actions without using a shell:

  • (with-stdout-to <file> <DSL>)

  • (copy <src> <dst>)

  • ...

• Removed all implicit uses of bash or the system shell. Now one has to write explicitly (bash "...") or (system "...")

• Generate meaningful versions in META files

• Strengthen the scope of a package. Jbuilder knows about package foo only in the sub-tree starting from where foo.opam lives

0.1.alpha1 (04/12/2016)

First release