Data-encoding tutorial

This page presents a high-level overview of the data-encoding library as well as a detailed, user-oriented tutorial. It is meant as an introduction for users wanting to learn how to use the library or wanting to progress beyond basic usage.

Part 1: The basics

This first part of the tutorial shows some basic usage of the library and establishes some basic vocabulary used in the rest of the tutorial. If you are already familiar with the library, you should still skim this section for the vocabulary and other such useful details.

The encoding type

The main type exported by data-encoding is 'a encoding. A value e of type u encoding is a runtime, formal description of the type u. This description includes information about the representation of values of the type u. Thanks to this information, the value e can be used to serialise and deserialise values of type u.

let e : u encoding = … (* see later how to build an encoding *) in
let v : u = … in
match Binary.to_string e v with
| Ok s -> … (* [s] is a compact string representation of [v] *)
| Error e -> …

The type 'a encoding is aliased as 'a t. The shorter alias is intended to be used qualified when the Data_encoding module is not opened in the current scope ('a Data_encoding.t is less repetitive than 'a Data_encoding.encoding) whereas the longer alias is intended to be used unqualified when the module is open ('a encoding is less ambiguous than 'a t). In the tutorial, we use the unqualified long form: encoding. In your code, use as is appropriate.

In this tutorial, we use the verbs “serialise” and “deserialise”, rather than “encode” and “decode” to avoid confusion when used in the -ing form: “serialising” is unambiguous whereas “encoding” is potentially confusing as it may also refer to the aforementioned type.

Backends

Data-encoding provides functions to serialise and deserialise to the following backends:

Binary: The data is serialised as a sequence of bytes. It can be presented as a string or written directly to a buffer.

module Binary : sig
	type read_error = …
	type write_error = …
	val of_string : 'a encoding -> string -> ('a, read_error) result
	val to_string : 'a encoding -> 'a -> (string, read_error) result
	(* and some more functions, detailed below *)
end

JSON: The data is transformed into an OCaml representation of the JSON format. This can further be serialised into a string when sending it over the network or printing it onto stdout/stderr.

module Json : sig
	type json =
		[ `O of (string * t) list
		| `Bool of bool
		| `Float of float
		| `A of t list
		| `Null
		| `String of string ]
	val construct : 'a encoding -> 'a -> json
	val to_string : json -> string
	val from_string : string -> (json, string) result
	val destruct : 'a encoding -> json -> 'a
	(* and some more functions, detailed below *)
end

How to build an encoding

The data-encoding library exports several combinators intended to build encodings. These encodings are grouped under the Encoding module but are also available at the top level of the library.

We give a brief overview of the most useful combinator of the API here, and much more detail about them below. The full list can be found on the library documentation: Data_encoding.Encoding.

There are ground encodings (i.e., combinators with zero parameters) to cover the ground types of OCaml:

• unit for the unit type.
• int8, uint8, int16, uint16, int31 for the int type. The different encodings correspond to different size of integers and will fail if they are given data outside of their supported range.
• float for the float type.
• bool for the bool type.
• string for the string type.
• bytes for the bytes type.

E.g., you can serialise a boolean b with Data_encoding.(Binary.to_string bool b).

On top of these ground encodings there are encoding combinators for the parametric types of OCaml:

• option for the option type.
• result for the result type.
• list for the list type.
• array for the array type.

E.g., you can make an encoding for the type (int, string) result list with Data_encoding.(list (result int31 string)).

For algebraic data-types, you can use the following combinators:

• tup2, tup3, tup4, etc. for tuples.
• union and case for variants.

If you use the JSON backend, then the objN combinators can lead to more readable serialised values than the tupN combinators. The objN combinators take a specific type of parameters: fields. These are constructed with the req combinator. E.g., obj2 (req "low" uint8) (req "high" uint8) encodes objects such as { "low": 0, "high": 5 }. More details on this later.

And if you have a recursive data-type, you can use the special combinator:

• mu for recursive types.

E.g., for the type t = Leaf of int | Node of (string * t list) you can use

let e =
  let open Data_encoding in
  mu "t" (fun e ->
    union [
      case ~title:"leaf" (Tag 0)
        int31
        (function Leaf l -> Some l | _ -> None)
        (fun l -> Leaf l);
      case ~title:"node" (Tag 1)
        (obj2 (req "path" string) (req "content" (list e)))
        (function Node (name, content) -> Some (name, content) | _ -> None)
        (fun (name, content) -> Node (name, content));
  ])

Finally, the following combinator allows the use of arbitrary OCaml code to convert to and from some intermediate representation during serialisation and deserialisation:

• conv

E.g., to create an encoding for the record type t = { x: int; y: int } you can use

let e =
  let open Data_encoding in
  conv
    (fun {x; y} -> (x, y))
    (fun (x, y) -> {x; y})
    (tup2 uint8 uint8)

That's all for the basic uses. There are a few more combinators and a few more variants of the ones above. But before listing all existing encodings, you need to learn a bit more about the inner workings of data-encoding. With the knowledge of the internal representation and machinery you will be able to get more out of a complete technical listing.

A small example

Consider the following type.

type 'a t =
  | Leaf of 'a
  | Stump of string option
  | Node of { step: string; content: 'a t list }

You can define an encoding for this type. If you wish to try for yourself, do so. Otherwise, here is a guide:

• The type is parametric. It is not actually a type, it is instead a type constructor. And so you cannot define actually an encoding, you can define instead a function to construct the encoding: 'a encoding -> 'a t encoding.
• The type is recursive so you will need to start with a mu combinator.
• The type is a variant (sum) so you will need to use a union.
• The branches use products and lists so you will need to use the combinators for those.

This is a top-down view of the type: from its general structure to the details at the end of each of its variants. The combinators are applied in the same order.

(* note: not actually an encoding,
   instead a function ['a encoding -> 'a t encoding] *)
let e a =
  let open Data_encoding in
  mu "t" (fun e -> (* recursive encoding for use within the encoding itself *)
    union [
      case (Tag 0) ~title:"Leaf"
        a (* parameter here, matches the location of parameter in type *)
        (function Leaf l -> Some l | _ -> None)
        (fun l -> Leaf l);
      case (Tag 1) ~title:"Stump"
        (option string)
        (function Stump s -> Some s | _ -> None)
        (fun s -> Stump s);
      case (Tag 2) ~title:"Node"
        (obj2
          (req "step" string)
          (req "content" (list e (* recursive encoding here *))))
        (function Node { step; content } -> Some (step, content) | _ -> None)
        (fun (step, content) -> Node { step; content });
    ]
  )

Part 2: Under the hood

The Part 1 focused on the surface of the library: the main parts of the interface. This Part 2 goes into some implementation details. Just enough of it to build a good mental model and understand the interface even better in Part 3 and the advanced uses in Part 4.

Internal representation, what you need to know

When you use data-encoding combinators, you build increasingly complex 'a encoding values. This type is opaque but in this section you will peek under the hood and check what it is made of. This is to help understand the finer points of data-encoding later on.

A first approximation

The type 'a encoding is a GADT where the variants map to different possible instantiations of the type parameter 'a. For example,

• the ground encoding unit: unit encoding is the variant Ignore: unit encoding
• the ground encoding uint8: int encoding is the variant Uint8: int desc, and
• the combinator list: 'a encoding -> 'a list encoding uses the variant List: {elts : 'a encoding} -> 'a list encoding.

The encoding list (list uint8) is represented by List {elts = List {elts = Uint8}} of the type int list list encoding.

This is a fine approximation, but it's not precise enough for you to understand the later finer points of this tutorial.

A more truthful picture

The presentation above is simplistic. Here are additional facts to consider when using combinators.

First, combinators can introduce more than one variant.

E.g., the list combinator actually produces a value made of two variants: Dynamic_size (which, in the binary backend, introduces a 32-bit size field) and List (as presented above). In the binary back-end, the Dynamic_size variant introduces a size header. (See later for more details.) As a result, Binary.to_string (list uint16) [1;3] is "\x00\x00\x00\x04\x00\x01\x00\x03" where \x00\x00\x00\x04 is the size header for the data following (4 bytes), \x00\x01 is 1 and \x00\x03 is 3.

Note that Dynamic_size indicates the size of the following data in bytes, not the number of elements in the list. For this reason, the JSON backend simply ignores the Dynamic_size variant: end of collections are managed with closing delimiters instead.

Second, combinators include some fields which are not directly related to the type parameter of the encoding. These fields are used to ensure some internal safety properties or some user-side invariants.

E.g., the List variant is actually defined as List : {length_limit : limit; elts : 'a encoding} -> 'a list encoding. The field length_limit can be set by the optional parameter ?max_length of the list combinator. When set, this field will ensure that the length of the serialised/deserialised list fits within the user-specified bounds. If not, the serialising/deserialising process will fail.

Lastly, combinators don't just produce the variants, they also perform some safety checks on the inputs.

E.g., consider the case of list unit which is meant to serialise values such as [(); ()]. (This example is somewhat artificial, but it generalises to more realistic ones.)

When serialising the () value in binary, it is represented with 0 bytes. I.e., Binary.to_string unit () is "". Additionally, recall that when serialising a list of elements, the elements are just serialised side-by-side. (See list uint16 example above.)

Consequently, the lists [], [()], [(); ()], as well as all other lists of the same type would be serialised to the same byte representation (a size field indicating 0 bytes to follow, followed by 0 bytes), and it would be impossible to know how many elements there were when deserialising.

For this reason, the list unit expression will raise an exception.

(Note that, should the need arise, you can define an encoding for unit list using conv. You can try if you want.)

Other such limitations exists for this combinator and for others. You will learn more about them below.

What you maybe don't need to know

And now for a few more final details on the 'a encoding type. You can skip this section in your first reading, or if you are not interested in the finer implementation details. Even without this section, your mental model of the data-encoding library will be sufficient to understand everything but the very last bits of this tutorial.

First, the type 'a encoding is not represented merely by the tree of variants mentioned above. The 'a encoding type is in fact a record with an encoding field carrying the tree of variants mentioned above, as well as a json_encoding field carrying a version of the encoding specialised for the JSON backend.

type 'a encoding = {
  encoding : 'a desc (* This is the tree of variants *) ;
  mutable json_encoding : 'a Json_encoding.encoding option;
}

When using the JSON backend (more details below), the tree of variants is converted to a JSON encoding (a value of type 'a Json_encoding.encoding), then the result of this conversion is stored into the json_encoding field (to avoid recomputing it later), and then it is passed to the json-data-encoding library for actual serialisation/deserialisation.

Second, the type 'a encoding is not completely opaque. It is abstract when used from the data-encoding library's intended entry-point: the Data_encoding module. But it is concrete when accessed from the Data_encoding__Encoding module.

Note that it is not recommended to access the concrete representation of 'a encoding/'a desc values. For one thing it is not stable from one version to the next. For another, the rest of the library makes important assumptions about 'a encoding values which are not documented.

Nonetheless, accessing the concrete definition of this type might be useful when experimenting with the data-encoding library, when trying to understand some specific combinators better, etc.

Backends, in more details

Binary

The Binary backend of data-encoding serialises values to (and deserialises values from) a compact sequence of bytes. You can use this backend via the Data_encoding.Binary module.

Writing and reading

This module provides different writers and readers. The simplest of these is the to_string/of_string pair: serialising to and deserialising from a string. These functions return a result which carries either the expected value or a detailed error report: a write_error or a read_error which you can match against or you can simply pretty-print to the end-user.

The to_string_opt, to_string_exn, of_string_opt, and of_string_exn variants map the result into an option (if you intend to ignore the specific error anyway) or an exception (if you intend for errors to interrupt the control flow).

Note that whichever variant of these functions you call, the binary serialising and deserialising processes fail early: they execute to the point where they encounter an issue at which point they stop completely and abruptly.

The functions read (respectively write) is similar to the of_string (resp. to_bytes) function, but it takes additional parameters to read from (resp. write) within a certain range of the given string (resp. bytes).

More specifically, the read function takes two parameters: offset and length. This is keeping in style with the Stdlib blit functions. The write function takes a single writer_state parameter which is initialised with an offset and a maximum length. It returns the actual number of written bytes. This is to allow consecutive uses to write consecutive values.

Finally, the read_stream function allows non-blocking stream-reading of a binary serialised value. Specifically, this function can be used to deserialise a value that is received one chunk at a time. This is useful if you are receiving data from a remote machine in a series of chunks of data sent over a network.

Querying properties

The Binary module also provides some functions to query binary-specific properties of an encoding. Specifically, properties related to size.

The function length takes an encoding and a value and returns the number of bytes it would take to serialise this value.

(Note that the data-encoding library uses interchangeably length and size to describe "a number of bytes". In this tutorial, as much as the data-encoding API permits, we use size for the "number of bytes" and reserve length for the number of elements in a data structure.)

In some cases, length ignores the value and only reads the encoding. This happens when the encoding is of a fixed size such as tup2 int64 int32.

In some cases, length serialises the value and returns the number of bytes of the serialised form. This happens when the encoding is unpredictable such as conv Foo.to_string Foo.of_string string.

In most cases, the process is a hybrid of these two extremes. E.g., for the encoding list (tup2 int64 (conv f h e)) the function f is applied to all the elements of the list, and possibly some more work is done depending on the content of e, but the int64s are not serialised.

The function maximum_length takes an encoding and returns the maximum number of bytes it might take to serialise any value of the type described by the encoding. It returns None if the encoding is unbounded.

The function maximum_length is less precise than length in that it returns a bound rather than an exact value, but it is also more general in that the result is valid for any input value. Consequently, it is more appropriate than length for checking some safety properties (e.g., the messages of the network layer can never exceed a given length).

Sizing during the serialisation and deserialisation processes

When serialising and deserialising, the binary backend maintains some internal state. Part of this internal state has to do with the input/output management: at what offset is it reading in the input string? at what offset is it writing into the output bytes? etc. Another part of this internal state has to do with sizing and knowing when to stop. This part has significant consequences and so you need to learn about it.

When deserialising from binary, it is important for the process to know when to stop. This is easy when the encoding has a fixed size (e.g., to read a tup2 int64 int32 you simply read 8 bytes and then read 4 bytes and you are done). It is non-trivial when the encoding has a range of possible sizes or even is potentially unbounded.

E.g., when you are reading a tup2 (list uint16) (list uint8), you have to decide when you stop interpreting input as uint16 and when do you start interpreting them as uint8.

Remember that the list encoding introduces two variants: Dynamic_size (List _). The reason for the Dynamic_size is to allow the decoding process to stop.

Size categories

The data-encoding library classifies encodings into three groups:

• Fixed-size encodings: those where the size is entirely determined by the content of the encoding value, and is not influenced by which value is being serialised/deserialised. E.g., tup2 int64 int32 takes the same space whether you encode (0L, 0l) or (Int64.max_int, Int32.max_int).

• Dynamic-size encodings: those where the size can only be inferred from the serialised data itself. E.g., list uint16 where the size header placed in front of the elements allows to determine the size of the whole serialised value. Whatever the value that is serialised, it is prefixed with a size header which allows to dynamically reconstruct the size.

  Note that there are dynamic-size encodings which do not use a size header. More on which later.

• Variable-size encodings: those where the size cannot be known from the serialised data nor from the encoding value. E.g., Variable.list uint16 is an expression which produces a List variant without a Dynamic_size variant. The value is serialised as is, without any size header.

Querying sizing categories

The function classify: 'a encoding -> [`Fixed of int | `Dynamic | `Variable] returns the category that an encoding is part of.

Local state and sizing

When the data-encoding's binary backend deserialises a value, it traverses the encoding's tree of variants and the sequence of bytes at the same time. To illustrate this, we consider the following running example:

• The encoding list uint16 which is represented internally as Dynamic_size (List { elts = Uint16; _ }).
• The value [1; 2; 3] which is represented in binary as the sequence of bytes \x00\x00\x00\x06\x00\x01\x00\x02\x00\x03.

The process starts with the whole encoding variant tree and the offset 0.

It matches on the construct tree and finds the pattern Dynamic_size e.

Accordingly, it reads a size header (4 bytes, interpreted as one integer).

The size header is \x00\x00\x00\x06 which represents the number 6.

The offset is now 4.

At this point the internal state of the process changes significantly.

It now considers the sub-encoding List { elts = Uint16; _ }.

But the state also includes the information from the size header: there are exactly 6 bytes representing that list.

With this information, the process is able to read the elements of the list one after another and knows when to stop.

The code for this deserialisation process is located in src/binary_reader.ml and the relevant, abridged, heavily commented excerpt is

let rec read_rec
  : type r. r Encoding.t -> state -> r
  = fun e state ->
  match e.encoding with
  (* most cases omitted *)
  | Dynamic_size {encoding = e} ->
      (* read an int31, increases the offset *)
      let sz = Atom.int31 state in
      (* safety check + compute remaining size after deserialisation of [e] *)
      let remaining = check_remaining_bytes state sz in
      (* store the size header value in state *)
      state.remaining_bytes <- sz ;
      (* safety check *)
      ignore (check_allowed_bytes state sz : int option) ;
      (* RECURSIVE CALL *)
      let v = read_rec e state in
      (* safety check *)
      if state.remaining_bytes <> 0 then raise_read_error Extra_bytes ;
      (* restore remaining size *)
      state.remaining_bytes <- remaining ;
      v
  | Uint16 -> Atom.uint16 state (* read a uint16 *)
  | List {elts = e} -> read_list e state (* read the list *)

and read_list
  : type a. a Encoding.t -> state -> a list =
  fun e state ->
  let rec loop acc =
    if state.remaining_bytes = 0 then
      (* finished reading all the bytes that are available *)
      List.rev acc
    else
      let v = read_rec e state in (* read one element *)
      loop (v :: acc) (* read more*)
  in
  loop []

JSON

The JSON backend serialises and deserialises values to and from JSON. You can access this backend via the Data_encoding.Json module.

Serialisation and deserialisation

The JSON backend of data-encoding serialises values to (and deserialises values from) the json type.

type json =
  [ `O of (string * json) list
  | `Bool of bool
  | `Float of float
  | `A of json list
  | `Null
  | `String of string ]

E.g., Data_encoding.(Json.construct (list uint16) [1; 3]) is `A [ `Float 1.; `Float 3.].

The additional functions Json.to_string and Json.from_string transform values of the json type into and from a string representation.

E.g., Json.to_string (`A [ `Float 1.; `Float 3.]) is "[1, 3]".

Unlike the binary backend, all error management in the JSON backend is done via exception raising. You should wrap all calls to construct and destruct within a try-with block.

Numerals

In the JSON standard, all numerals are represented as floats. This works well for floats and small integers such as int32. However, some of the int64 integers do not have a float of the same numerical value.

For this reason, the data-encoding library represents int64 integers as well as arbitrary precision integers (from Zarith) as strings in their decimal notation. E.g., 0L is represented as `String "0".

Other numerals are represented as JSON numerals (i.e., floats).

The json-data-encoding library

Within the data-encoding package, the JSON backend implementation is somewhat small. This is because all the core operations are delegated to the json-data-encoding package. The additions are:

• A function to convert an all-purpose encoding ('a encoding) into a json-data-encoding encoding ('a Json_encoding.encoding).
• Thin wrappers around the json-data-encoding serialisation/deserialisation functions to call the conversion function when needed.

You shouldn't need to use the json-data-encoding library unless you need to access some advanced features.

Streaming serialisation

The JSON backend supports lazy serialisation of sequences. Specifically, the function construct_seq takes an encoding and a value and returns a sequence (Stdlib.Seq) of JSON lexemes.

E.g., Data_encoding.(Json.construct_seq (list uint16) [1; 3]) is a sequence of the following elements: `As, `Float 1., `Float 3., `Ae. These elements are generated lazily (i.e., as the sequence is traversed).

The additional function blit_instructions_seq_of_jsonm_lexeme_seq takes a buffer (of the bytes type) and a sequence of lexemes, and generates a sequence of (bytes * int * int). These triplets include a byte source, an offset, and a length. They can be used to copy chunks onto a socket or some other such output. The order of the elements of the triplets is compatible with OCaml Stdlib blit functions.

Requesting a new element of the blit-instruction sequence forces elements of the underlying lexeme sequence.

The documentation of these function give more details about valid use cases, caveats and such. Read before use.

Limitations

As mentioned previously, some combinators perform safety checks before producing a tree of variants. If these safety checks fail, the combinator raises an exception instead. This limits the ways in which you can use some combinators.

Before we go into the specific limitations, it is important to note that the data-encoding library gives a lot of control to the user. This is intentional: one of the supported use case for the library is to define data-exchange formats. You need to be able to predict exactly what the data serialises to.

Data-encoding gives you control by providing low-level combinators. It doesn't attempt to interpret your intentions by automatically adding size headers and other tags. As a result, some compositions of combinators lead to unusable encodings: encodings which the backends cannot process. When you compose combinators in such a way, they raise exceptions.

With this in mind, you can look at the main limitations of the data-encoding combinators.

Nullables

When serialising to JSON, some values may be represented as null. For example, with the encoding option string (for the type string option), the value None is represented as null and the value Some "of this" is represented as "of this". This is somewhat standard practice in JSON, inherited from the use of null in Javascript.

It all works until you try to combine options. Specifically, consider the encoding option (option string) (for the type string option option). The value None is represented as null. And the value Some None is also represented as null. And it is impossible to deserialise because it is impossible to distinguish between the two.

(Note that this is not just about options, other encodings may yield null. E.g., you may define a union where one case is represented as null.)

In order to avoid issues during deserialisation, the option combinator checks whether its argument is nullable (i.e., whether it can produce the null JSON value), and, if so, it raises an exception.

You can avoid this with a simple application of obj1. For example, the following encoding is valid.

let e =
  let open Data_encoding in
  option (obj1 (req "v" (option string)))

It leads to the following values:

• None is represented as null
• Some None is represented as { "v": null }
• Some (Some "here") is represented as { "v": "here" }

Sizing categories

As mentioned in the section covering the binary backend, sizing of encodings matters. Specifically, the deserialisation process needs to keep track of sizing information. As a user, you may not care about the details mentioned before, but you need to be aware that different restrictions apply to the different sizing categories of encodings. These restrictions simply aim to allow correct deserialisation.

E.g., consider the following type:

type 'a t = { id: string; content: 'a; flag: bool }

for which you may define the encoding

let e a =
  obj3
    (req "id" string)
    (req "content" a)
    (req "flag" bool)

If you use e (list uint16) then the deserialisation process can happen normally: read a size header, read the string bytes, read a size header, read as many bytes for the list, read one byte for the boolean, done.

On the other hand, if you use e (Variable.list uint16) (remember that Variable.list doesn't include a size header) then the deserialisation process cannot happen. Specifically, there is no clear way to know when the content ends and when the flag begins.

When a combinator receives an argument which would lead to an undeserialisable encoding, it raises an exception. This happens when:

• You use a variable-size encoding in a product (tup or obj) except on the right-most position.
• You use a variable-size encoding for the elements of a collection (list or array).

Part 3: An encyclopedic list of all combinators

This section aims to covers each combinator in as much detail as you might ever want. If you find that you need more details, please open an issue on the project's repository or get in touch with one of the maintainers.

Ground encodings

unit : unit encoding (fixed:0) is a ground encoding for the unit type. In binary it has a fixed size of 0 bytes (in other words, it is omitted). In JSON it is serialised to {} (the empty object) but it accepts (and ignores) any value during deserialisation: Json.destruct unit v returns () no matter what v is.

empty : unit encoding (fixed:0) is a ground encoding for the unit type. In binary it has a fixed size of 0 bytes (in other words, it is omitted). In JSON it is represented as {} (the empty object). Note that, unlike unit, it only accepts {} during deserialisation: Json.destruct empty (`O []) is () but Json.destruct empty v for any other value raises an exception.

null : unit encoding (fixed:0, nullable) is a ground encoding for the unit type. In binary it has a fixed size of 0 bytes (in other words, it is omitted). In JSON it is represented as null (the null value).

constant : string -> unit encoding (fixed:0) is an encoding for the unit type. In binary, it has a fixed size of 0 bytes (in other words, it is omitted). In JSON it is represented as the string passed as argument.

E.g., Json.construct (constant "blah") () is `String "blah" which serialises to "blah".

uint8 : int encoding (fixed:1) is a ground encoding for the int type. Serialisation through any backend will fail if the integer is not within the range of unsigned 8-bit integers. E.g., Binary.to_string uint8 1024 returns a Error and Json.construct uint8 1024 raises an exception. In binary it has a fixed size of 1 byte. In JSON it is represented as a float. Deserialisation from JSON raises an exception if the float representation is not a valid unsigned 8-bit integer.

int8 : int encoding (fixed:1) is a ground encoding for the int type. Serialisation through any backend will fail if the integer is not within the range of signed 8-bit integers. In binary it has a fixed size of 1 byte. In JSON it is represented as a float. Deserialisation from JSON raises an exception if the float representation is not a valid signed 8-bit integer.

uint16 : int encoding (fixed:2) is a ground encoding for the int type. Serialisation through any backend will fail if the integer is not within the range of unsigned 16-bit integers. In binary it has a fixed size of 2 bytes. In JSON it is represented as a float. Deserialisation from JSON raises an exception if the float representation is not a valid unsigned 16-bit integer.

int16 : int encoding (fixed:2) is a ground encoding for the int type. Serialisation through any backend will fail if the integer is not within the range of signed 16-bit integers. In binary it has a fixed size of 2 bytes. In JSON it is represented as a float. Deserialisation from JSON raises an exception if the float representation is not a valid signed 16-bit integer.

int31 : int encoding (fixed:4) is a ground encoding for the int type. Serialisation through any backend will fail if the integer is not within the range of signed 31-bit integers. In binary it has a fixed size of 4 bytes. In JSON it is represented as a float. Deserialisation from JSON raises an exception if the float representation is not a valid signed 31-bit integer.

The specific threshold of 31 bit is intended to represent portable native OCaml integers. Indeed, in OCaml, the GC reserves one bit to tag integers vs pointers. As a result, on 32-bit architectures, integers are represented with 31 bits.

int32 : int32 encoding (fixed:4) is a ground encoding for the int32 type. Serialisation through any backend will fail if the integer is not within the range of signed 32-bit integers. In binary it has a fixed size of 4 byte. In JSON it is represented as a float. Deserialisation from JSON raises an exception if the float representation is not a valid signed 32-bit integer.

int64 : int64 encoding (fixed:8) is a ground encoding for the int64 type. Serialisation through any backend will fail if the integer is not within the range of signed 64-bit integers. In binary it has a fixed size of 64 byte. In JSON it is represented as a string. Specifically, as the string representation of the value in decimal notation.

ranged_int : int -> int -> int encoding (fixed:?) is a combinator for the int type. The encoding ranged_int low high is for encoding ints within the low-to-high interval. Both bounds are inclusive.

The ranged_int combinator will raise an exception if the bounds are not contained within the 31-bit integer range. (This can only happen on 64-bit machines.)

Serialisation and deserialisation through any backend will fail if the input does not fit in the specified bounds.

In binary, it is either represented as an int31, or, interval permitting, as one of the smaller varieties of integers. E.g., ranged_int 1000 1100 is represented as a uint8. (If you are interested in more details, the specific mapping of ranges to integer size is controlled by the range_to_size function of binary_size.ml.)

Warning: if you change the bounds of a range, you may change the representation of the values.

In JSON, it is represented as a float.

n : Zarith.t encoding (dynamic) is a ground encoding for the Zarith.t type. Serialisation and deserialisation through any backend fails if the input is negative.

In binary it is represented as a dynamically-sized sequence of bytes. Instead of a size header, the value is represented as a series of bytes where the most significant bit of each byte indicates if it is the last byte or not. All other bits concatenated make up the little-endian order representation of the integer.

In JSON it is represented as a string in decimal notation.

z : Zarith.t encoding (dynamic) is a ground encoding for the Zarith.t type.

In binary it is represented like n, except that a bit is reserved for sign.

In JSON it is represented as a string in decimal notation.

int_like_z : ?min_value:int -> ?max_value:int -> unit -> int encoding (dynamic) is a combinator for ranged integers represented in the same way as z.

The min_value and max_value bounds are inclusive. The combinator raises an exception if min_value > max_value. It also raises an exception if the range extends beyond the range of integers which can be represented by int31. If not given, min_value and max_value default to the int31 range.

Unlike a simple conv Z.of_int Z.to_int z, the combinator int_like_z provides additional safety checks. Specifically, int_like_z will compute the maximum size of the binary representation and inserts a check_size node explicitly.

In JSON, the values are represented as a float.

uint_like_n : ?max_value:int -> unit -> int encoding (dynamic) is a combinator for ranged positive integers represented in the same way as n.

The max_value bound is inclusive. The combinator raises an exception if max_value < 0 or if max_value is greater than the upper limit of int31. If not givem, max_value defaults to the int31 upper bound.

Unlike a simple conv Z.of_int Z.to_int n, the combinator uint_like_n provides additional safety checks. Specifically, uint_like_n will compute the maximum size of the binary representation and inserts a check_size node explicitly.

In JSON, the values are represented as a float.

float : float encoding (fixed:8) is a ground encoding for the float type. In binary it is has a fixed size of 8 bytes which carries an IEEE 754 double-precision floating-point numeral. In JSON it is represented as a JSON number literal.

ranged_float (fixed:8) is a combinator for the float type. Just like ranged_int, serialisation/deserialisation through any backend will fail is the value is out of bounds. It is represented as with float otherwise.

bool : bool encoding (fixed:1) is a ground encoding for the bool type. In binary it has a fixed size of 1 byte. It serialises to false to 0x00 and true to 0xff. It deserialises 0x00 to false and any other value to true. In JSON it is represented as a boolean literal.

string : string encoding (dynamic) is a ground encoding for the string type. In binary it is represented as a 4 bytes size header followed by the specified number of bytes matching the bytes in the string. In JSON it is represented as a string literal. If it contains characters that may need escaping, these characters are escaped.

More specifically, when using the construct function, it produces a `String s value. The string is not escaped here because this is still an OCaml value. When using to_string, the string is escaped.

bytes : bytes encoding (dynamic) is a ground encoding for the bytes type. In binary it is represented like a string: a 4 bytes size header followed by the specified number of bytes. In JSON it is represented as a hex-encoded string literal. That is, each character of the OCaml bytes is represented by two characters in the hexadecimal alphabet: 0-9, a-f, A-F.

This quirk of representation has its historical roots in the Tezos project where the bytes type was used to represent binary blobs (cryptographic signatures and such) whilst the string type was used to represent human-readable text (error messages and such). There is additional nuance because the Tezos project actually started by rolling out its own bytes-like type, but that's as much detail as this tutorial will mention.

string' : string_json_repr -> string encoding (dynamic) is a combinator for the string type. In binary it is represented like a string. In JSON, it's representation depends on the string_json_repr parameter: with Plain it is represented as a String literal (like string above), with Hex it is represented as an hex-encoded String literal (like bytes above). Use Plain for strings which are intended to be human-readable, use Hex for strings which are intended to be blobs.

Note that for backwards compatibility reason, the original string and bytes encoding have not been modified and this encoding has an apostrophe in the name: string'.

The optional parameter ?length_kind allows you to control the representation of the size-header of the string. Note that the size header imposes a limit on the size of the string. E.g., `Uint8 will only be able to support strings up to 255 bytes long. Also note that for internal consistency and compatibility with 32-bit machines, `N is actually limited in range to 2^30.

bytes' : string_json_repr -> bytes encoding (dynamic) is a combinator for the bytes type. In binary it is represented like a bytes. In JSON, it's representation depends on the string_json_repr parameter: with Plain it is represented as a String literal (like string above), with Hex it is represented as an hex-encoded String literal (like bytes above). Use Plain for bytes which are intended to be human-readable, use Hex for bytes which are intended to be blobs.

Note that for backwards compatibility reason, the original string and bytes encoding have not been modified and this encoding has an apostrophe in the name: bytes'.

The optional parameter ?length_kind allows you to control the representation of the size-header of the string. Note that the size header imposes a limit on the size of the string. E.g., `Uint8 will only be able to support strings up to 255 bytes long. Also note that for internal consistency and compatibility with 32-bit machines, `N is actually limited in range to 2^30.

Simple combinators

option : 'a encoding -> 'a option encoding (?, nullable) is a combinator for the option parametric type. In binary None is represented as a single 0x00 byte and Some v is represented as an 0x01 byte followed by the bytes representing v. In JSON None is represented as null and Some v is represented as v is.

Note that in JSON the union is not explicitly made unambiguous. Specifically, if v can be represented as null then there are multiple values which can be represented in the same way. To avoid this possibility, the option combinator raises an exception when its argument can yield null values in JSON.

The size category is the same as the encoding passed as argument. Do note that for the fixed category, the size is increased by 1 for the tag.

result : 'a encoding -> 'e encoding -> ('a, 'e) result encoding (?) is a combinator for the result parametric type. In binary Ok v is represented as an 0x01 byte followed by the bytes representing v and Error e is represented as an 0x00 byte followed by the bytes representing e. In JSON Ok v is represented as {"ok": <v>} and Error e is represented as {"error": <e>}.

The size category depends on the size categories of the two arguments. Simply put: if either argument is variable then so is the result, otherwise if either argument is dynamic so is the result, otherwise if both argument are fixed but with different constants then the result is dynamic, otherwise both arguments are fixed with the same constant and the result is fixed (with an additional byte for tag).

list : 'a encoding -> 'a list encoding (dynamic) is a combinator for the list parametric type. In binary it is represented as a 4 bytes size header followed by a simple concatenation (without any separator or terminator) of each of the elements. In JSON it is represented as an Array literal.

The optional parameter ?max_length allows you to specify the maximum number of elements in the list. Serialising and deserialising will fail is this number of element is exceeded.

Known bug: the length limit argument is ignored in JSON.

array : 'a encoding -> 'a array encoding (dynamic) is a combinator for the array parametric type. It is represented the same as a list. The optional parameter ?max_length has the same effect.

list_with_length : [`N | `Uint8 | `Uint16 | `Uint30] -> 'a encoding -> 'a list encoding (dynamic) is a combinator for the list parametric type. In binary it is represented as a length header followed by the concatenation of the representation of all the elements of the list.

Note that the length header indicates the length of the list (i.e., the number of elements it holds) rather than the size of the representation (the number of bytes it takes to represent).

The length header size is represented differently depending on the first parameter of the combinator:

• `N: the length is represented by uint_like_n,
• `Uint8: the length is represented by a uint8,
• `Uint16: the length is represented by a uint16,
• `Uint30: the length is represented by a positive int31.

Remember that, out of concern for compatibility with 32-bit architectures, in case of uint_like_n/`N, the length cannot exceed the maximum value of uint30/int31.

The ?max_length parameter has the same effect as with list. If the ?max_length parameter is set, it must be less than or equal to the maximum value the length encoding can represent: otherwise an exception is raised. E.g., list_with_length ~max_length:2000 `Uint8 raises an exception because 2000 is greater than the maximum uint8 value (255).

In JSON, it is represented the same as with the list encoding: as an Array literal.

array_with_length : [`N | `Uint8 | `Uint16 | `Uint30] -> 'a encoding -> 'a array encoding (dynamic) is a combinator for the array parametric type. It is represented as list_with_length. The optional ?max_length parameter has the same effect.

Sizing variants of existing combinators

Some combinators are specialised for certain sizes of inputs. We list them here.

Fixed.string : int -> string encoding (fixed:n) is a combinator for strings of statically known length. In binary it is represented as exactly n bytes which are exactly those of the string. In JSON it is represented as a string literal.

Given the encoding Fixed.string n, serialising will fail if the input string has a length different than n. Deserialising in JSON will also fail for the same reason. Note, however, that when deserialising in binary, exactly n bytes are read. There is no way to check that the serialised data was correct: exactly n bytes are read and that is all.

Fixed.bytes: int -> bytes encoding (fixed:n) is a combinator for values of the type bytes of statically known length. In binary it is identical to Fixed.string. In JSON it fails with in the same cases as Fixed.length but it uses the hexadecimal encoding described in bytes.

Fixed.add_padding: 'a encoding -> int -> 'a encoding (fixed:+n) is a combinator which adds blank bytes in binary and has no effect in JSON. In binary Fixed.add_padding e n is represented as e followed by n null bytes. When deserialising, the padding is ignored, even if it contains non-null bytes.

This combinator can be used for alignment, to reserve space for future extensions, or for any other such reason.

This combinator raises an exception if the argument is not a fixed-size encoding.

Fixed.list: int -> 'a encoding -> 'a list encoding (?) is a combinator for lists of statically known length. In JSON it is represented as a list literal, serialising and deserialising will fail if the length does not match the expected one. In binary, it is represented as the concatenation of the elements, serialising and deserialising will fail if the length does not match the expected one.

The binary deserialisation failure happens if there is a mismatch between the number of elements and the number of available bytes (typically inferred from size-headers): Not_enough_data if the deserialisation has read all the available bytes but hasn't reached the expected length, Extra_bytes if the deserialisation has read all the elements but there are bytes left to be read.

The combinator will raise an exception if given a variable-sized encoding. Otherwise, the resulting encoding is of the same category as the argument.

Fixed.array: int -> 'a encoding -> 'a array encoding (?) is a combinator for arrays of statically known length. They are represented like Fixed.list and fail under the same circumstances.

Variable.string: string encoding (variable) is a ground encoding for the string type. In JSON it represents data as a string literal. In binary it represents data as the raw bytes which compose the string, without a size header. This is a variable size encoding.

Variable.bytes: bytes encoding (variable) is a ground encoding for the bytes type. In JSON it represents data as a string literal in hexadecimal encoding. In binary it represents data as the raw bytes which compose the value, without a size header. This is a variable size encoding.

Variable.list: 'a encoding -> 'a list encoding (variable) is a combinator for the list parametric type. For JSON, it is similar to list: represented as a list literal. For binary, it is represented as the concatenation of the bytes representing each of the elements of the list, without size headers, separator, nor terminators.

As with list, the optional parameter ?max_length allows you to specify the maximum number of elements in the list. Serialising and deserialising will fail if this number of elements is exceeded. (The failure mode is similar to that of Fixed.list, but it happens only if the number of elements exceeds the limit, not if it is under.)

As with list, the combinator will raise an exception if the argument is variable-sized.

Variable.array: 'a encoding -> 'a array encoding (variable) is a combinator for the array parametric type. For JSON, it is similar to array: represented as a list literal. For binary, it is represented as the concatenation of the bytes representing each of the elements of the array, without size headers, separator, nor terminators.

As with array, the optional parameter ?max_length allows you to specify the maximum number of elements in the array. Serialising and deserialising will fail if this number of elements is exceeded.

Bounded.string: int -> string encoding (dynamic) is a combinator for strings of statically bounded length. In JSON it is represented as a string literal. In binary it is represented with a size header followed by the byte content of the string payload. The size of the size header depends on the bound of the size of the string. Specifically, the size header is the smallest integer size that can accommodate the lengths within the bound: either a uint8, uint16, or int31.

Bounded.bytes: int -> bytes encoding (dynamic) is a combinator for values of the type bytes of statically bounded length. In JSON it is represented as a string literal in hexadecimal encoding. In binary it is represented with a size header followed by the byte content of the bytes payload. The size of the size header depends on the bound of the size of the bytes. Specifically, the size header is the smallest integer size that can accommodate the lengths within the bound: either a uint8, uint16, or int31.

ADT combinators: records (and other products)

obj1: 'a field -> 'a encoding (?) is a combinator for representing a single-field object. In JSON it is represented as an object of exactly one entry. In binary it is represented as the content of the field.

obj2, obj3, and so on up to obj10 are combinators for representing objects with the specified number of fields. In JSON they are represented as objects with each of the fields present. In binary they are represented as the concatenation of all the fields, one after another.

The main intended use of objN is to represent records.

Fields are created with the following combinators:

req: string -> 'a encoding -> 'a field is for a required (non-optional) field. The string parameter is used as the key in the object representation.

opt: string -> 'a encoding -> 'a option encoding is for an optional field. In JSON the field is omitted if the value is None and present if Some _. In binary it is represented with a one-byte tag.

In the case where the field is in the right-most position of the obj and the field's encoding is of variable size, then the binary representation is to omit None and represent Some v as v, without the single-byte header.

varopt: string -> 'a encoding -> 'a option field is for an optional field. The representation is identical to that of opt, but the field sizing is considered variable-sized (even if the field's encoding is actually fixed or dynamic). This makes it possible to leverage the corner case (right-most position and variable-size) mentioned above for a more compact encoding.

dft: string -> 'a encoding -> 'a -> 'a field is a combinator for fields which have a known default value. In binary the field is always represented as is. In JSON the field is omitted if the value is equal to the provided default.

merge_objs is a combinator to produce one bigger object encoding out of two smaller object encodings. The main intended use is to allow you to define objN for N > 10 as you need it: let obj14 e1 … e14 = merge_objs (obj7 e1 … e7) (obj7 e8 … 14). It can also be used to programmatically or meta-programmatically construct more and more complex objects.

In general, you should try to balance the objects being merged. E.g., it is better to use merge_objs (obj7 …) (obj7 …) than merge_objs (obj10 …) (obj4 …). This is mostly important in places where performance matters, but even then, it is not vitally important.

Note that by default, there are no checks for duplicate field names in objects. E.g., obj2 (req "foo" int) (req "foo" int) is accepted by the library and will produce JSON object { "foo":…, "foo":… }. This is a valid form of JSON although it is not recommended.

If you want to avoid duplicate names, you can open the With_field_name_duplicate_checks module. Opening this module shadows the obj* and merge_objs combinators mentioned above. The shadowing versions raise exceptions when they would produce an encoding with duplicate field names.

let e =
  let open Data_encoding in
  let open With_field_name_duplicate_checks in
  obj2 (req "foo" int) (req "foo" int) (* raises [Invalid_argument] *)

In addition to records, data-encoding supports encodings for tuples.

tup1: 'a encoding -> 'a encoding is a combinator for representing data as a one-tuple. The JSON representation of tup1 e is as an array literal containing exactly one element representing e. The Binary representation of tup1 e is identical to that of e.

The main intended use of tup1 is to wrap the argument in a Tup variant. The resulting encoding can then be passed to the merge_tups function. This is sometimes necessary if you programmatically generate some tuple encodings.

tup2, tup3, and so on up to tup10 are combinator for representing N-tuples. The JSON representation is as an array literal containing the exact required number of elements. The binary representation is the concatenation of the representation of the arguments.

These combinators fail if the sizing of the different component leads to unreadable data. If that is the case, you may need to wrap the left parameter in a dynamic_size combinator.

merge_tups is a combinator to produce one bigger tuple encoding out of two smaller tuple encodings. The main intended use is to allow you to define tupN for N > 10 as you need it: let tup14 e1 … e14 = merge_tups (tup7 e1 … e7) (tup7 e8 … 14). It can also be used to programmatically construct more and more complex tuples.

In general, you should try to balance the tuples being merged. E.g., it is better to use merge_tups (tup7 …) (tup7 …) than merge_tups (tup10 …) (tup4 …). This is mostly important in places where performance matters, but even then, it is not vitally important.

ADT combinators: variants (a.k.a. sums)

union is a combinator for making encodings of variant types. The union combinator takes a list of cases as parameters.

let custom_result o e =
  union [
    case
      ~title:"success"
      (Tag 0)
      (tup1 o)
      (function Ok v -> Some v | _ -> None)
      (fun v -> Ok v);
    case
      ~title:"failure"
      (Tag 255)
      (obj1 (req "failure" e))
      (function Error v -> Some v | _ -> None)
      (fun v -> Error v);
  ]

The case function takes the following parameters:

• title: string for documentation in schemas only
• case_tag: most often Tag n
• 'a encoding: an encoding for the payload of the case
• 't -> 'a option: a variant-to-payload projection function
• 'a -> 't: a payload-to-variant injection function

Note that union will raise an exception if two cases use the same numerical tag.

The projection function should always look like the ones in the example: one variant returns Some with the payload, and all other variants (hence the wildcard pattern) return None.

In binary, for serialisation, the projection function of each case is called until one returns Some payload at which point the tag is serialised as an integer and the payload is serialised with the case's payload encoding. For deserialisation, the tag is read, the corresponding case is selected, the payload is deserialised based on the case's encoding, and the deserialised value is passed to the injection function.

You can pass the optional parameter ?tag_size to the union combinator to control the size of the tag.

In JSON, for serialisation, the projection function of each case is called until one returns Some payload at which point the payload is serialised with the case's payload encoding. For deserialisation, the process attempts to deserialise the JSON value based on the encoding of each case until one succeeds. The deserialised value is passed to the injection function.

Note that for JSON, you are responsible for disambiguating the different cases of the union: there are no tags, the first match is used. Consider an alternative encoding for result in which the Ok case is presented as-is:

let bare_result o e =
  union [
    case
      ~title:"success"
      (Tag 0)
      o (* no wrapping here! *)
      (function Ok v -> Some v | _ -> None)
      (fun v -> Ok v);
    case
      ~title:"failure"
      (Tag 255)
      (obj1 (req "failure" e))
      (function Error v -> Some v | _ -> None)
      (fun v -> Error v);
  ]

This encoding works well in many situations. However, consider a corner case such as bare_result (assoc int) int. In this case the value Error 0 is serialised to the JSON value { "failure": 0 } which is deserialised to the value Ok [("failure", 0)]. The encoding is ambiguous and the serialisation and deserialisation processes are not inverses of each other.

This same reasoning applies to any situation where the o encoding can be represented as { "failure": _ }.

It is your responsibility to ensure serialisation and deserialisation correctly mirror each other.

As an alternative, you can open the With_JSON_discriminant module. Opening this module shadows the case and union combinators (as well as matched and matching, see below) to include JSON discriminant fields in the objects of the union.

When using this shadowing module, you pass a string tag in addition to the int tag. The string tag is inserted in a field named "kind" inside the object encoding of the case. For this purpose, the union (and matching) combinator will raise the Invalid_argument exception if:

• the cases have non-object encodings, or
• the case encodings already have a "kind" field, or
• several of the cases have equal string tags.

matching is a combinator similar to union but it takes an additional matching-function parameter. This matching-function avoids the linear scanning of the cases during serialisation.

let custom_result o e =
  matching
  (function
    | Ok v -> matched 0 (tup1 o) v
    | Error e -> matched 255 (obj1 (req "failure" e)) e)
  [ … (* same cases as in the example above *) ]

The matching-function should always look like the one above: a list of simple patterns that simply return matched <tag value> <encoding> <payload>.

It is your responsibility to ensure that the matching-function and the case list agree on tags, encodings and payload. To this end, it is recommended that you bind the tags and encodings to variables which you use in both places. See the documentation of matching for an example of this pattern.

Recursive combinator

mu is a combinator for recursive types.

let custom_list a =
  mu
    "list"
    (fun l ->
      union [
        case
          ~title:"Cons"
          (Tag 0)
          (obj2 (req "head" a) (req "tail" l))
          (function x :: xs -> Some (x, xs) | _ -> None)
          (fun (x, xs) -> x :: xs);
        case
          ~title:"Nil"
          (Tag 1)
          null
          (function [] -> Some () | _ -> None)
          (fun () -> []);
      ]
    )

The mu combinator takes a string parameter intended only for documentation and a fixpoint function which, given an encoding for the type, returns the unfolded encoding for the type. This may or may not be confusing depending on previous exposure to other μ theoretical shenanigans and applied questionable trickery. It is outside the scope of this tutorial to get you over this possible hurdle. You can simply adapt the above template or any other example from the tests or the cookbook (see below) to your needs.

Note that for efficiency, the fixpoint function is memoised: it is not repeatedly applied when traversing a recursive data structure. Also note that because of internal machinery regarding schema generation as well as JSON encoding conversion, the fixpoint function may still be called multiple times.

Multi-purpose combinators

conv is a combinator for applying arbitrary functions during serialising and deserialising. The main intended purpose is to convert the data from some uncommon, impractical, or abstract format into a concrete one. E.g., when encoding a hash-table, you first convert it to a simple key-value list.

let hashtbl (k: H.key encoding) (v: 'a encoding) : 'a H.t encoding =
  conv
    (fun h -> List.of_seq (H.to_seq h))
    (fun l -> H.of_seq (List.to_seq l))
    (list (tup2 k v))

Depending on the properties of the underlying data structure you are converting from and how you intend to use the serialised blob, you may need to canonicalise the converted representation too. E.g., in the example above, does the order in the list matter?

conv_with_guard is a variant of conv where the deserialisation function is partial. More specifically, it returns a ('a, string) result value where Error s will cause a deserialisation failure with s included in the message. The main intended purpose is to guarantee some invariant which, in the OCaml code, may be guaranteed by the type system, assertion checks, or some other means.

let non_empty_hashtbl k v =
  conv_with_guard
    (fun h -> List.of_seq (H.to_seq h))
    (function
      | [] -> Error "hashtbl is empty"
      | l -> H.of_seq (List.to_seq l))
    (list (tup2 k v))

with_decoding_guard is a combinator to add a deserialisation guard function to an arbitrary encoding. E.g., the conv_with_guard example above can be rewritten equivalently as

let non_empty_hashtbl k v =
  conv
    (fun h -> List.of_seq (H.to_seq h))
    (fun l -> H.of_seq (List.to_seq l))
    (with_decoding_guard
      (function [] -> Error "hashtbl is empty" | _ -> Ok ())
      (list (tup2 k v)))

or also equivalently as

let non_empty_hashtbl k v =
  with_decoding_guard
    (fun h -> if H.length h = 0 then Error "hashtbl is empty" else Ok ())
    (conv
      (fun h -> List.of_seq (H.to_seq h))
      (fun l -> H.of_seq (List.to_seq l))
        (list (tup2 k v)))

delayed is a combinator to compute the encoding at each serialisation and deserialisation. This combinator takes a single parameter: a function to generate the encoding (unit -> 'a encoding) which is called when needed.

The main intended use is for encodings which depend on global mutable state. In the Octez code base, this is used to define the encoding of an extensible variant. The general idea is as follows (although in practice the code is more complicated mostly out of efficiency concerns):

type error = …
let error_case_encodings = ref []
let register_error case = error_case_encodings := case :: !error_encodings
let error_encoding =
  delayed (fun () -> union !error_case_encodings)

Known bug: In JSON, the encoding is only computed on first use. It is not recomputed at each use.

splitted is a combinator which given two distinct encodings dispatches the serialisation and deserialisation processes on either depending on the backend. More concretely, splitted ~json ~binary uses the json encoding in the JSON backend and the binary encoding in the binary backend.

Sizing combinators

check_size: int -> 'a encoding -> 'a encoding is a combinator which adds a runtime check during serialisation and deserialisation in binary. This check enforces that the binary blob representing the data does not exceed the limit.

The primary intended use of this combinator is to guard against some basic attacks when deserialising untrusted data. E.g., using check_size in the message encoding of a network application will cause deserialisation to fail early if another machine sends overly long data.

In JSON it has no effect.

dynamic_size: 'a encoding -> 'a encoding is a combinator for adding a size header to a given encoding. Note that the size header is always added, regardless of the sizing category of the argument encoding. E.g., dynamic_size (dynamic_size uint8) will occupy 9 bytes in binary.

The optional parameter ?kind lets you decide the binary representation of the size header.

• `Uint30 (the default) represents it on four bytes and allows sizes up to 2^30 bytes.
• `Uint16 represents it on two bytes and allows sizes up to 2^16 bytes.
• `Uint8 represents it on one byte and allows sizes up to 2^8 bytes.
• `N represents it on a variable number of bytes (as per the n encoding) and allows sizes up to 2^30 bytes. Note that during serialisation, this combinator can be more computationally expensive because the size-header is dynamically-sized.

If you are using this combinator in a programmatic setting, you may want to apply it selectively depending on the result of classify:

let dynamic_size_if_variable e =
  match classify e with
  | `Variable -> dynamic_size e
  | `Fixed _ | `Dynamic -> e

Compact combinators

The Compact module provides combinators to produce 'a compact encodings. The compact encodings help represent data in a more compact way. The main trick that compact encodings rely on is to coalesce multiple tags into a single shared tag.

These compact encodings can then be converted into vanilla encodings via Compact.make.

At present, this tutorial does not cover compact encodings. You can read the API documentation of the Data_encoding.Compact to learn more about them.

Part 4: So what else can you do?

Cookbook

Making sure de/serialisation are inverse of each other

In most uses of the data-encoding library, you want the serialising and deserialising processes to be exact inverses of each other. It is your responsibility to make sure this property holds. And you are encouraged to add fuzzing tests towards this end.

The biggest way you might accidentally break this property is with unions in JSON. Indeed, remember that in JSON, the serialisation process picks the first case where the projection function matches the value, and the deserialisation process picks the first case where the encoding matches the JSON. Thus, you need to ensure that the JSON serialised by a given case is matched by that same case.

The best way to ensure this error is to open the With_JSON_discriminant module. When you do so, the union/case and matching/matched functions will take additional parameters and perform some checks for you. The parameters are transformed into discriminants in JSON.

Note that in the With_JSON_discriminant, the combinators make assumption about the encodings of the cases that you must abide to — or get an exception in return. Specifically you must:

• provide object encodings for all the cases,
• not name any of the fields of the case encodings "kind" (the name is reserved for the discriminant), and
• not use the same discriminant twice.

E.g.,

let unambiguous_option v =
  let open With_JSON_discriminant in
  union [
    case ~title:"Some"
      (Tag (0, "some"))
      (obj1 (req "v" v))
      (function Some v -> Some v | _ -> None) (fun v -> Some v);
    case ~title:"None"
      (Tag (1, "none"))
      empty (* empty is an object with zero fields *)
      (function None -> Some () | _ -> None) (fun () -> None);
  ]

As an alternative, you can enforce the discriminant discipline manually. One way is for you to include a "kind" field carrying the name of the variant in the cases' payload encoding. E.g.,

let unambiguous_option v =
  union [
    case ~title:"Some"
      (Tag 0)
      (obj2 (req "kind" (constant "some")) (req "v" v))
      (function Some v -> ((), v) | _ -> None) (fun ((), v) -> Some v);
    case ~title:"None"
      (Tag 1)
      (obj1 (req "kind" (constant "none")))
      (function None -> Some () | _ -> None) (fun () -> None);
  ]

Remember that constant is omitted in binary but always included in JSON.

The other way is for you to use the variant's name as a field name for the whole of the cases' payload encoding. E.g.,

let unambiguous_option v =
  union [
    case ~title:"Some"
      (Tag 0)
      (obj1 (req "some" v))
      Fun.id Option.some;
    case ~title:"None"
      (Tag 1)
      (obj1 (req "none" null))
      (function None -> Some () | _ -> None) (fun () -> None);
  ]

Both approaches are valid. There are minor trade-offs in term of boilerplate code depending on the payloads of the cases. You can choose based on personal preference or to ease integration with a more opinionated system.

Still, the simplest is to trust the library and open the With_JSON_discriminant module.

Making sure de/serialisation are not(!) inverse of each other

In most uses of the data-encoding library, you want the serialising and deserialising processes to be exact inverses of each other. Most. There are a few use cases when serialisation purposefully produces a different representation than the deserialisation. The two main such use cases are for legacy support (the ability to decode values encoded by previous versions of your software) and more generally when there are multiple valid representations of the data.

Given a type t with its encoding e and a deprecated type legacy_t with its encoding legacy_e, and given an upgrade: legacy -> t function, you can define an encoding which is able to deserialise both legacy and current formats.

let ee =
  splitted
    ~binary:e (* legacy support in binary is out of scope of this example *)
    ~json:(
      union [
        case ~title:"current"
          (Tag 0) (* ignored because we are in JSON, but necessary *)
          e
          Option.some
          Fun.id;
        case ~title:"legacy"
          Json_only
          legacy_e
          (fun _ -> None (* never match when serialising *))
          upgrade
      ])

With this encoding, the serialisation and deserialisation processes are not inverse of each other. Specifically, the legacy JSON values can be deserialised but when they are re-serialised they are different.

Note that the hack presented above is for JSON values. If you need backwards compatibility in the binary backend, you should plan this in advance and add a version tag to the representation.

Finally, note that this example of backwards compatibility is just one example. There are other use cases for making serialisation and deserialisation not inverse of each other. You should probably document why and how you are doing so.

Maps, Sets, Hashtbls, etc.

When you need to define encodings for collection data structures, the simplest is often to convert them to lists or arrays.

let e k v =
  conv
    (fun m -> List.of_seq (Map.to_seq m))
    (fun l -> Map.of_seq (List.to_seq l))
    (list (tup2 k v))

However, you should also consider the following:

• Do you need to sort the list? Or is the conversion guaranteed to yield the same order every time? Or does the order not matter for your use case?
• Are there some invariants you can check? Are there invariants you should check? E.g., about the size of the data structure, about the presence or absence of some specific elements, about the presence or absence of some duplicates, etc.

Mutually recursive encodings

You can use mu to define recursive encodings for recursive types. You can also use mu to define mutually-recursive encodings for mutually-recursive types. The generic recommended pattern to follow is this.

let make_e1 e2 =
  mu "e1" (fun e1 ->
    … (* define encoding e1, using e2 where appropriate *)
  )

let e2 =
  mu "e2" (fun e2 ->
    let e1 = make_e1 e2 in
    … (* define encoding e2, using e1 where appropriate *)
  )

let e1 = make_e1 e2

In most cases you will want to hide make_e1 from your interface. You can do so via an mli file or by only defining it locally.

let (e1, e2) =
  let make_e1 e2 = … in
  let e2 = … in
  let e1 = make_e1 e2 in
  (e1, e2)

You can find a full example in the file test/mu.ml.

Encodings which are more compact (use fewer bytes)

A common concern with the binary backend is to use as few bytes as possible. Indeed, having a compact serialised form is the main advantage of the binary backend over the JSON one.

As mentioned earlier, the Data_encoding.Encoding.Compact module offers dedicated combinators to squeeze as much information in as few bytes as possible. This is mainly done by grouping multiple tags each taking a handful of bits into a single shared tag. There are additional tricks to push even more information (list lengths and such) in the unused bits of tags.

But you can also use some techniques on the vanilla encodings. The first one is to encode as many of the code invariants into the encodings. Especially the size ones.

For example, if some type is represented as a string, but the values are guaranteed to be under a certain length, then the Bounded.string will automatically shave some unneeded bytes from the size header. In general, the Bounded variants of a given combinator are more compact than the plain variant.

You can also be weary of integer sizes. Prefer smaller integer sizes where possible. And even if an integer-like type is not guaranteed to always fit within a smaller integer representation, you can use uint_like_n and int_like_z which occupy less bytes on small values but more space on bigger values.

If you need to find exact cut-off points for various integer ranges for various encodings, you can check the code in misc/eval_numsizes.ml.

You can also reduce the size of the size headers of lists if you know that they will fit within a small enough space. To that end, you can replace a list combinator (which introduces a full `Uint30 four bytes size header) with a tailored call to dynamic_size followed by a Variable.list.

dynamic_size ~kind:`Uint16 (Variable.list …)

You can use ~kind:`N to use the variable-size encoding for the size. It is more compact on smaller sizes but less compact on larger ones. See uint_like_n for details.

Finally, you should be careful not to add unnecessary dynamic_size. If you are unsure whether you need one in a specific place, you can use the classify function to determine this.

Beware of side-effects in conv and mu and such

As a general rule, you should avoid side-effects in all the functions you pass to the combinators of data-encoding: the conversion functions of conv, the guarding function of with_decoding_guard, the fixpointing functions of mu, the projection and injection function of case, etc.

The part of the program which triggers a serialisation and deserialisation processes can be quite distant from the encoding definitions. As such side-effects can seriously hinder readability of the code.

A more specific concern is that it is difficult to predict which functions will be called. Indeed, the serialisation and deserialisation processes are fail-early: the are interrupted as soon as something goes awry. This makes the it difficult to predict which set of functions will always be called together and which might be called separately.

Even more complexity is added by the backtracking mechanism of union case selection in JSON deserialisation. Remember that the JSON unions are not tagged by the data-encoding library and that it is your responsibility to do so. Depending on how you do so, the deserialisation can make significant progress in a specific case before failing.

All in all, side-effects in all the functions passed to combinators make code less predictable and should be avoided.

Overloading

Occasionally, you might be interested in deserialising only part of a value. Consider, for example, the case where you are only interested in two fields out of five of an object. In case where the discarded fields are small and simple to deserialise, you can simply deserialise everything and not use them. But if the discarded fields are expensive to deserialise then you might want to skip them.

For such cases, you can define two distinct encodings. The one you use for writes and for full reads. And the other you use for partial reads. The latter uses specific combinators to skip content that is not interesting. E.g.,

let e =
  obj4
    (req "id" (Fixed.string 32))
    (req "name" string)
    (req "tags" (list string))
    (req "scores" (list int64))

let id_and_name_e =
  conv
    (fun _ -> failwith "Not intended for serialisation")
    (fun (id, name, (), ()) -> (id, name))
    (obj4
      (req "id" (Fixed.string 32))
      (req "name" string)
      (req "tags"
        (splitted (* ignore either way, with [unit] in JSON, by [conv] in binary *)
          ~json:unit
          ~binary:(conv (fun _ -> assert false) (fun _blob -> ()) string)))
      (req "scores"
        (splitted
          ~json:unit
          ~binary:(conv (fun _ -> assert false) (fun _blob -> ()) string))))

There are different ways to ignore parts of an encoding. The one above is the most generic and relies on the fact that string introduces, like many other combinators, a size header. You can use Fixed.string to ignore fixed-size fields.

Registration

The Registration module allows you to build a global registry of encodings. These encodings can be queried by names.

In the Octez code base, this is used to build the tezos-codec binary. This binary can convert between binary and JSON representations (allowing users to decode otherwise difficult to read network messages and protocol data). Checkout this brief tutorial on tezos-codec.

Slicing

The Slicing module allows you to split a binary blob of serialised data into its basic components. This is a tool mostly intended for debugging and experimentation.

For example, given the following encoding, value and its serialised string:

let e = tup3 (option int16) string (list uint8)
let v = (Some 404, "not found", [1;1;2;1;2;4])
let b = Result.get_ok @@ Binary.to_string e v

Then the call Binary.Slicer.slice_string e b returns the following value:

[
  {name = "Some tag";       value = "\001";             pretty_printed = "1"};
  {name = "int16";          value = "\001�";            pretty_printed = "404"};
  {name = "dynamic length"; value = "\000\000\000\t";   pretty_printed = "9"};
  {name = "string";         value = "not found";        pretty_printed = "\"not found\""};
  {name = "dynamic length"; value = "\000\000\000\006"; pretty_printed = "6"};
  {name = "uint8";          value = "\001";             pretty_printed = "1"};
  {name = "uint8";          value = "\001";             pretty_printed = "1"};
  {name = "uint8";          value = "\002";             pretty_printed = "2"};
  {name = "uint8";          value = "\001";             pretty_printed = "1"};
  {name = "uint8";          value = "\002";             pretty_printed = "2"};
  {name = "uint8";          value = "\004";             pretty_printed = "4"};
]

Each element in the list is a slice of the binary serialised representation of the value v.

JSON streaming

Serialising large values can consume a significant amount of time and space. You can mitigate this by manually splitting your data structure and then serialising the different parts separately. You can then send those parts off as separate messages over the network or storing them in separate files on disk. But this manual mitigation mechanism is not always convenient. And so the JSON backend offers a mechanism dedicated to tackling this issue.

Json.construct_seq is a streaming counterpart to Json.construct. Instead of producing a json value, it produces a lazy sequence of jsonm lexemes.

type jsonm_lexeme =
  [ `Null (* null literal *)
  | `Bool of bool (* boolean literal *)
  | `String of string (* string literal *)
  | `Float of float (* numeral literal *)
  | `Name of string (* field-name *)
  | `As (* array-start: opening square-bracket *)
  | `Ae (* array-end: closing square-bracket *)
  | `Os (* object-start: opening curly-bracket *)
  | `Oe (* object-end: closing curly-bracket *)
  ]
val construct_seq : 't Encoding.t -> 't -> jsonm_lexeme Seq.t

The encoding and the value are traversed on a by need-basis. In particular, the call to construct_seq does not traverse any part of the encoding or the value. Only by consuming the sequence can you cause this to happen.

The main intended use of the lexeme sequence is by converting it to a blit-instruction sequence. A blit-instruction sequence is a sequence of triplets (bytes * int * int) where each triplet is a valid source-offset-length set of input for the Stdlib's blit functions.

val blit_instructions_seq_of_jsonm_lexeme_seq :
  buffer:bytes -> jsonm_lexeme Seq.t -> (Bytes.t * int * int) Seq.t

There are other seq-conversion functions to serialise to other forms (e.g., a sequence of string) but the blit-instruction function reuses the bytes buffer which helps reduce memory usage.

Consuming the blit-instruction sequence consumes the underlying lexeme sequence which causes the value and encoding to be traversed.

Here's a full working example using the Lwt library for I/O.

let send channel message =
  let bis =
    Json.blit_instructions_seq_of_jsonm_lexeme_seq
      ~buffer:(Bytes.create 4096)
      (Json.construct_seq application_message_encoding  message)
  in
  let rec loop bis =
    match bis () with
    | Seq.Nil ->
        Lwt_io.flush channel
    | Seq.Cons ((bytes, offset, length), bis) ->
        let* () = Lwt_io.write_from_exactly channel bytes offset length in
        let* () = Lwt.pause () in
        loop bis
  in
  loop bis